New bike dilemma
Comments
-
Hate to drag this thread away from you DDD but ....
What's the general consensus on Mavic open pro ceramic rims, worth the extra dosh?Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
Taking my time with this build mostly because I'm afraid of breaking the carbon
Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
New bars arrived this morning, ordered yesterday from Planet-X awesome 3T carbon lovely, however my credit card bill also arrived.
FARK!!!
:?Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
Erm i'm not sure how far to wrap these bars, any suggestions?
It's hard to see from this picture but they have a flat palm section across the tops.
Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
This is a stupid question but please bear with me.
That bit sticking up out of your frame's head tube which such looks like a pipe, what is it?
Any time I see a 'frame and forks' for sale I never see that bit
Like here
I can't get my head round how that area of the bike is assembled. Presumably this bit is attached to the forks. Do you still have to fit a 'headset'? If so how?“New York has the haircuts, London has the trousers, but Belfast has the reason!0 -
TailWindHome wrote:This is a stupid question but please bear with me.
That bit sticking up out of your frame's head tube which such looks like a pipe, what is it?
The fork steerer tube - uncut and long enough to fit the largest frame size with plenty of spacers.
ITB will need to be making with the hacksaw shortly.....Faster than a tent.......0 -
The 'pipe' in ITB's photo is the steerer for the fork. In the kinesis pic it has been photoshopped out.
An integrated/external headset is required. The steerer passes through it, you stack spacers onto the headset to the required height and then clamp the stem onto the steerer. The steerer is then cut off to the correct height and an expanding bung/star-fangled nut goes in the top.
All described here (i think):
http://www.parktool.com/repair/readhowto.asp?id=650 -
Ja wot they saidRule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
itboffin wrote:Taking my time with this build mostly because I'm afraid of breaking the carbon
You do have a torque wrench, I hope? Still worth taking your time though!Dahon Speed Pro TT; Trek Portland
Viner Magnifica '08 ; Condor Squadra
LeJOG in aid of the Royal British Legion. Please sponsor me at http://www.bmycharity.com/stuaffleck20110 -
Even more dumb question, but what does a headset do?Food Chain number = 4
A true scalp is not only overtaking someone but leaving them stopped at a set of lights. As you, who have clearly beaten the lights, pummels nothing but the open air ahead. ~ 'DondaddyD'. Player of the Unspoken Game0 -
DonDaddyD wrote:Even more dumb question, but what does a headset do?
It connects fork to frame, allowing the fork to rotate but holding it in place.Dahon Speed Pro TT; Trek Portland
Viner Magnifica '08 ; Condor Squadra
LeJOG in aid of the Royal British Legion. Please sponsor me at http://www.bmycharity.com/stuaffleck20110 -
StuAff wrote:itboffin wrote:Taking my time with this build mostly because I'm afraid of breaking the carbon
You do have a torque wrench, I hope? Still worth taking your time though!
+1
Please tell me you have a torque wrench.1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
Pinnacle Monzonite
Part of the anti-growth coalition0 -
Not yet :oops:Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
itboffin wrote:Not yet :oops:
I recall reading somewhere that when people are tested on how tight to tighten bolts (without torque wrenches obv!), the small ones they drastically overtighten and the large ones they undertighten.
So, basically, the low torque bolts are where you cracked the frame and the large torque bolts are the ones that will come undone when you are descending at 50mph.
Get yourself a nice BBB torque wrench - only £50 or so!Faster than a tent.......0 -
JonGinge wrote:Rolf F wrote:Get yourself a nice BBB torque wrench - only £50 or so!
I can also recommend some of this:
http://www.wiggle.co.uk/p/cycle/7/Finis ... 360038013/
Yes it's on the list also
BTW Have you seen the 2011 Deda stem/handlebar range comes in black & whiteRule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
itboffin wrote:Ja wot they said
Gonna cut the steerer yourself? That's the one job I still delegate to the LBS.
I used to say the same of fitting a headset. Then I realised wood and a hammer work fine.
What sort of bung/starnut arrangment does the steerer tube take?0 -
I think you can get a cutting guide - it clamps on to the steerer with a hacksaw-sized slot - but by the time you've found one it's probably easier to go to the LBS.1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
Pinnacle Monzonite
Part of the anti-growth coalition0 -
Greg66 wrote:itboffin wrote:Ja wot they said
Gonna cut the steerer yourself? That's the one job I still delegate to the LBS.
I used to say the same of fitting a headset. Then I realised wood and a hammer work fine.
What sort of bung/starnut arrangment does the steerer tube take?
LBS will be cutting the steerer and fitting my new record hesdset at the same time, full carbon forks need an expander plug rather than the usual star nut but I thought i'd use a hope head doctor for this build.Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
Are we there yet?“New York has the haircuts, London has the trousers, but Belfast has the reason!0
-
Are we there yet?“New York has the haircuts, London has the trousers, but Belfast has the reason!0
-
Nope epic fail actually, I have all the parts and a shiny new torque wrench but I've found several key problems with the build.
1. I don't want to force the crown race on the full carbon forks, LBS job me thinks
2. I don't trust the torque wrench/me
3. I can't get at the impossibly stupid placed hex screw on the shifters that holds the band and don't want to peel the hoods off.
4. I don't have the UT crankset tool
5. My fork bung has a rounded off screw from my last bike build attempt
hrump!!
:xRule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
itboffin wrote:
3. I can't get at the impossibly stupid placed hex screw on the shifters that holds the band and don't want to peel the hoods off.
You need a Torq key - one of the star headed ones. Using a regular Allen key will thread it in no time.0 -
MatHammond wrote:itboffin wrote:
3. I can't get at the impossibly stupid placed hex screw on the shifters that holds the band and don't want to peel the hoods off.
You need a Torq key - one of the star headed ones. Using a regular Allen key will thread it in no time.
Yah I know that, duh! :P
Solved that one now, pulled the hoods off grrrrRule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
This is how far i've gotten
Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
itboffin wrote:MatHammond wrote:itboffin wrote:
3. I can't get at the impossibly stupid placed hex screw on the shifters that holds the band and don't want to peel the hoods off.
You need a Torq key - one of the star headed ones. Using a regular Allen key will thread it in no time.
Yah I know that, duh! :P
Solved that one now, pulled the hoods off grrrr
It took me a while to figure out when I fitted mine!0 -
This build is proving more problematic than my last 9 or 10 bikes
Where do i set the shifters on these aero bars?
Rule #5 // Harden The Feck Up.
Rule #9 // If you are out riding in bad weather, it means you are a badass. Period.
Rule #12 // The correct number of bikes to own is n+1.
Rule #42 // A bike race shall never be preceded with a swim and/or followed by a run.0 -
I'd normally have the end of an ergonomic bar level, or pointing slightly downwards. Guess with shaped tops you need to make sure they feel right as well though...0
-
I'm with Matt - looking at the angle between the hoods and the top, I'd say they look right, but then looking down to the drops, I'd say they should be flat or very nearly flat at the bottom - they're pointing too far down for me.
Obviously if you rotate them to flat, the levers will need to shift down and round the loop on the bar a bit more, to get that nice run off the flat part that you've currently got.Cannondale Synapse 105, Giant Defy 3, Giant Omnium, Giant Trance X2, EMC R1.0, Ridgeback Platinum, On One Il Pompino...0