Seemingly trivial things that cheer you up
Comments
-
Cowsham wrote:keef66 wrote:Oak flooring arriving tomorrow. I do like a project. And an excuse to add to my tool collection. A reciprocating multitool has suddenly become essential if I'm to trim the necessary off the bottom of the door frames neatly!
I can forsee a thousand other uses for the thing so I don't think I'll buy too cheaply...
Absolutely I bought the wee bosch one for the kitchen -- it has a semicircular blade and a straight one -- it also doubles as a sander -- it got a lot of use -- I made the mistake of buying a reciprocating saw thinking it would be good for cutting the lengths of flooring -- the one I bought was too big and agricultural to do the end cuts so I ended up doing the trimming by hand saw.
I bought a cheap one (Workzone?) and as it's still going strong it doesn't owe me anything. I thought about getting the type that has a quick release for the tools, but I've since found that it wouldn't have made a lot of difference to me as it only takes a minute anyway. Brilliant piece of kit though, great for making the cuts in floorboards over the joists so that you can get to the void to put pipe/electrics in.
Anyway, back on topic.
The Simpsons last night. Bart's 'lines' on the blackboard...
Jesus' last words were not TGIF.
The older I get, the better I was.0 -
Capt Slog wrote:Cowsham wrote:keef66 wrote:Oak flooring arriving tomorrow. I do like a project. And an excuse to add to my tool collection. A reciprocating multitool has suddenly become essential if I'm to trim the necessary off the bottom of the door frames neatly!
I can forsee a thousand other uses for the thing so I don't think I'll buy too cheaply...
Absolutely I bought the wee bosch one for the kitchen -- it has a semicircular blade and a straight one -- it also doubles as a sander -- it got a lot of use -- I made the mistake of buying a reciprocating saw thinking it would be good for cutting the lengths of flooring -- the one I bought was too big and agricultural to do the end cuts so I ended up doing the trimming by hand saw.
I bought a cheap one (Workzone?) and as it's still going strong it doesn't owe me anything. I thought about getting the type that has a quick release for the tools, but I've since found that it wouldn't have made a lot of difference to me as it only takes a minute anyway. Brilliant piece of kit though, great for making the cuts in floorboards over the joists so that you can get to the void to put pipe/electrics in.
Anyway, back on topic.
The Simpsons last night. Bart's 'lines' on the blackboard...
Jesus' last words were not TGIF.
I thought Jesus was being sarcastic.0 -
Hmm. Screwfix or Toolstation (adjacent buildings so I get them confused) have one for £30 including some accessories and a 2 year warranty. How bad could it be??
The current crop of Bosch blue ones come with no extras and seem to require Bosch specific blades.
I do love my Bosch cordless drill and impact driver though...0 -
keef66 wrote:Oak flooring arriving tomorrow. I do like a project. And an excuse to add to my tool collection. A reciprocating multitool has suddenly become essential if I'm to trim the necessary off the bottom of the door frames neatly!
I can forsee a thousand other uses for the thing so I don't think I'll buy too cheaply...
One of my sons bought me a set of Japanese pull saws for my recent birthday. Incredibly thin but extremely sharp blades. Worked a treat for trimming a little off the bottom of the door frame. I had never used anything like them before (apart from a razor saw but that works on the push), they will trim flush without marking and require very little effort as they are so sharp. I now sport a plaster on one of my fingers where I touched the blade without realising.Rose Xeon CDX 3100, Ultegra Di2 disc (nice weather)
Ribble Gran Fondo, Campagnolo Centaur (winter bike)
Van Raam 'O' Pair
Land Rover (really nasty weather )0 -
Ouch - be very careful of using a jigsaw for the bottom of a door. It it's minimal, a belt sander (with the door taken off) is good or if it's more, find a friendly joiner with a decent bench saw.
If your're handy, a plane can do the job.
Which reminds me, I need a circular saw...
@Tashman: Send him my way when he's done.seanoconn - gruagach craic!0 -
bbrap wrote:keef66 wrote:Oak flooring arriving tomorrow. I do like a project. And an excuse to add to my tool collection. A reciprocating multitool has suddenly become essential if I'm to trim the necessary off the bottom of the door frames neatly!
I can forsee a thousand other uses for the thing so I don't think I'll buy too cheaply...
One of my sons bought me a set of Japanese pull saws for my recent birthday. Incredibly thin but extremely sharp blades. Worked a treat for trimming a little off the bottom of the door frame. I had never used anything like them before (apart from a razor saw but that works on the push), they will trim flush without marking and require very little effort as they are so sharp. I now sport a plaster on one of my fingers where I touched the blade without realising.
Mrs RJS bought me a Gyokucho Ryoba earlier this year and it is a revelation.1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
Pinnacle Monzonite
Part of the anti-growth coalition0 -
tools links please.Postby team47b » Sun Jun 28, 2015 11:53 am
De Sisti wrote:
This is one of the silliest threads I've come across.
Recognition at last Matthew, well done!, a justified honoursmithy21 wrote:
He's right you know.0 -
rjsterry wrote:Mrs RJS bought me a Gyokucho Ryoba earlier this year and it is a revelation.
A good hand saw is a very pleasing thing. I have a friend that always uses power tools and he made a right Horlicks of cutting a bit of worktop to make a bench for his garage with a jigsaw. After he broke the blade I cut the other end with a hand saw, much neater cut and didn't take much longer.0 -
Matthewfalle wrote:tools links please.
Warning: you may lose several hours of your day.
https://www.rutlands.co.uk/1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
Pinnacle Monzonite
Part of the anti-growth coalition0 -
Veronese68 wrote:rjsterry wrote:Mrs RJS bought me a Gyokucho Ryoba earlier this year and it is a revelation.
Cutting wood.
The cutting of the wood doesn't need to have a purpose.1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
Pinnacle Monzonite
Part of the anti-growth coalition0 -
rjsterry wrote:The cutting of the wood doesn't need to have a purpose.0
-
rjsterry wrote:Warning: you may lose several hours of your day.
https://www.rutlands.co.uk/
I like them too. Birthday coming up I could ask for lots of tools I'll never use.0 -
Tools in general cheer me up. Having acquired many over the last 50 years I am generally a happy bunny where tools are concerned. My lathe (Myford Super 7) and vertical mill (Alpine) take pride of place in my workshop. Funny how jobs are so much easier with the right bit of kit, must have saved thousands over the years by making/repairing things rather than chucking them away. Tinkering in the garage is almost as good (but not quite) as getting out on the bike after a crappy winter.Rose Xeon CDX 3100, Ultegra Di2 disc (nice weather)
Ribble Gran Fondo, Campagnolo Centaur (winter bike)
Van Raam 'O' Pair
Land Rover (really nasty weather )0 -
+1 for Tools
Currently tossing up whether I can justify a proper table saw with a slide that will do 8' *4' sheet, or just get a plunge saw with guide rail to do the job. Put up with a clamp and straight edge for ages and a lot of scribble paper to calculate offset of saw kerf and sick of it...
And I neeeeeeeed a dovetail jig for the router.
And a new drill press
And a welder (MIG / TIG)
And a band saw
And a new bench grinder
And a decent disc sander, plus maybe spindle one
...Open One+ BMC TE29 Seven 622SL On One Scandal Cervelo RS0 -
Stop! Stop!
For some serious workshop envy, have a look at Frank Howarth's YouTube channel.1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
Pinnacle Monzonite
Part of the anti-growth coalition0 -
I have an old socket on my desk that I got with some tools I was given when a neighbour's husband died. It is marked .628 A/F which is 3 thou over 5/8.
I have no idea why but it pleases me.0 -
rjsterry wrote:Stop! Stop!
For some serious workshop envy, have a look at Frank Howarth's YouTube channel.
Norm Abram on TV was another with a collection of shop tools to die for...
My (new) shed is approximately 170 square metres of floor space and has a separate power board from the house, including a 3 phase circuit... and it's dangerously empty...Open One+ BMC TE29 Seven 622SL On One Scandal Cervelo RS0 -
Common sense prevailed in the end and I've ordered the £30 job from Screwfix. It's only going to be used sporadically and for a few mins at a time, but it's going to make quite a few tricky jobs so much easier.
(How in god's name does anyone make a profit out of a £30 power tool with accessories and a carry case?)
I can invest the money I've saved in flowers and chocolate for Easter0 -
Veronese68 wrote:I have an old socket on my desk that I got with some tools I was given when a neighbour's husband died. It is marked .628 A/F which is 3 thou over 5/8.
I have no idea why but it pleases me.The above may be fact, or fiction, I may be serious, I may be jesting.
I am not sure. You have no chance.Veronese68 wrote:PB is the most sensible person on here.0 -
rjsterry wrote:Veronese68 wrote:rjsterry wrote:Mrs RJS bought me a Gyokucho Ryoba earlier this year and it is a revelation.
Cutting wood.
The cutting of the wood doesn't need to have a purpose.
You don't have a bar? Job #1!The above may be fact, or fiction, I may be serious, I may be jesting.
I am not sure. You have no chance.Veronese68 wrote:PB is the most sensible person on here.0 -
Wheelspinner wrote:rjsterry wrote:Stop! Stop!
For some serious workshop envy, have a look at Frank Howarth's YouTube channel.
Norm Abram on TV was another with a collection of shop tools to die for...
My (new) shed is approximately 170 square metres of floor space and has a separate power board from the house, including a 3 phase circuit... and it's dangerously empty...
I thought i was doing well with 7 square metres of shed. WTF does a 170 square metre shed even look like? that must be about the size of my house, garage and patio!!!0 -
PBlakeney wrote:Veronese68 wrote:I have an old socket on my desk that I got with some tools I was given when a neighbour's husband died. It is marked .628 A/F which is 3 thou over 5/8.
I have no idea why but it pleases me.0 -
Surrey Commuter wrote:Wheelspinner wrote:rjsterry wrote:Stop! Stop!
For some serious workshop envy, have a look at Frank Howarth's YouTube channel.
Norm Abram on TV was another with a collection of shop tools to die for...
My (new) shed is approximately 170 square metres of floor space and has a separate power board from the house, including a 3 phase circuit... and it's dangerously empty...
I thought i was doing well with 7 square metres of shed. WTF does a 170 square metre shed even look like? that must be about the size of my house, garage and patio!!!
Christ! That is indeed twice the size of the ground floor of our house + garage. Surely the term shed has an upper size limit? Wouldn't it more accurately be described as a hangar, light industrial unit or commercial warehouse?0 -
Veronese68 wrote:PBlakeney wrote:Veronese68 wrote:I have an old socket on my desk that I got with some tools I was given when a neighbour's husband died. It is marked .628 A/F which is 3 thou over 5/8.
I have no idea why but it pleases me.The above may be fact, or fiction, I may be serious, I may be jesting.
I am not sure. You have no chance.Veronese68 wrote:PB is the most sensible person on here.0 -
rjsterry wrote:Matthewfalle wrote:tools links please.
Warning: you may lose several hours of your day.
https://www.rutlands.co.uk/
Some of those Japanese wood tools are far too cheap. I had a catalogue of top quality Japanese wood tools given to me by a Luthier whom I did odd jobs for and you could easily add another digit to most of what was listed in that link.
Quality steel is very expensive.
I have a single 1/2 inch wood chisel given to me that cost over £40. With a good strop, I can use it to cut like a Stanley blade. Pity it is worn down to about 30mm of blade lremaining
(I really must do everything in mm. I've just about finished the bulk of the renovation and i'm still mixing up imperial and metric :roll: )seanoconn - gruagach craic!0 -
keef66 wrote:Surrey Commuter wrote:Wheelspinner wrote:rjsterry wrote:Stop! Stop!
For some serious workshop envy, have a look at Frank Howarth's YouTube channel.
Norm Abram on TV was another with a collection of shop tools to die for...
My (new) shed is approximately 170 square metres of floor space and has a separate power board from the house, including a 3 phase circuit... and it's dangerously empty...
I thought i was doing well with 7 square metres of shed. WTF does a 170 square metre shed even look like? that must be about the size of my house, garage and patio!!!
Christ! That is indeed twice the size of the ground floor of our house + garage. Surely the term shed has an upper size limit? Wouldn't it more accurately be described as a hangar, light industrial unit or commercial warehouse?0 -
Wheelspinner wrote:rjsterry wrote:Stop! Stop!
For some serious workshop envy, have a look at Frank Howarth's YouTube channel.
Norm Abram on TV was another with a collection of shop tools to die for...
My (new) shed is approximately 170 square metres of floor space and has a separate power board from the house, including a 3 phase circuit... and it's dangerously empty...
To paraphrase Crocodile Dundee, "That's not a shed..."1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
Pinnacle Monzonite
Part of the anti-growth coalition0 -
rjsterry wrote:Wheelspinner wrote:rjsterry wrote:Stop! Stop!
For some serious workshop envy, have a look at Frank Howarth's YouTube channel.
Norm Abram on TV was another with a collection of shop tools to die for...
My (new) shed is approximately 170 square metres of floor space and has a separate power board from the house, including a 3 phase circuit... and it's dangerously empty...
To paraphrase Crocodile Dundee, "That's not a shed...""I spent most of my money on birds, booze and fast cars: the rest of it I just squandered." [George Best]0 -
A Dewalt circular saw. Done. Ordered and i'll be able to chop my fing... err, do some work with it Monday.seanoconn - gruagach craic!0
-
I think I prefer Pinno Beadle to Jeremy Pinno.The above may be fact, or fiction, I may be serious, I may be jesting.
I am not sure. You have no chance.Veronese68 wrote:PB is the most sensible person on here.0