Carbon 456 owners pictures and spec

junglist_matty

Plyphon wrote:

What's the difference between gen 1 and gen 2 C456's?

They did actually change them very slightly; the first batch of frames had a different attachment system for the rear dropouts.

BlueAdvocate

the_moodster wrote:

paulneenan76 wrote:

you can see why it looked that way how's your build coming along?

mmm in my head I think it included 'whoever designed them' in there somewhere :roll:

. 1x10 so don't have to faff with front mech but I refuse to run the cables up the same side of the frame as the controls.

well my mech cables run in front of the head tube as i think it looks better that way (my opinion ), sure it can increase rub. The routing works though.

pastey_boy

If anyone is currently building a c456 I have a pair of 2012 RS RevelationRL's off a carbon 456, 20mm thru, tapered steerer, 150mm travel blk. Hardly used in great nick. I'm after a 15mm thru axle 120-140mm travel form of similar quality if anyone wants to swap.

leythervegas

You've got mail pasteyboy

chrisga

Some nice looking 456's in this thread. Have updated my bike build thread with some updates I've made to mine over the winter. Had it a year now and still love it.

[/url]http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=12844177&p=18226571#p18226571[/url]


IMG_1060 by chrisga, on Flickr

Mr.Evil

Hi all
I need some advice ...
I want to buy a OnOne Carbon 456, but I don't know which one to choose between the 18 and 20 inches.
those are my measurements:
Height 185 cm
Inside Leg 85 cm
Arm length 62 cm

Based on your experience, what is the best size for me? and with what Stem/Bar length and rise ?

thanks and sorry for my english :?

the_moodster

Mr.Evil wrote:

thanks and sorry for my english :?

Why what's wrong with it?

Mr.Evil

the_moodster wrote:

Mr.Evil wrote:

thanks and sorry for my english :?

Why what's wrong with it?

I'm from Italy, so I don't know if I write correctly :oops:

anyway, no advice for my problem?

the_moodster

Mr.Evil wrote:

I'm from Italy, so I don't know if I write correctly :oops:

anyway, no advice for my problem?

Don't worry it doesn't show, you're probably better at English than some native speakers

I can't really help out at the moment, I'm still building mine. I can say that I'm 180cm and I've gone for the 18" frame. Having not ridden it yet I can't really comment on the fit.

MrPhil

Mr.Evil wrote:

Hi all
I need some advice ...
I want to buy a OnOne Carbon 456, but I don't know which one to choose between the 18 and 20 inches.
those are my measurements:
Height 185 cm
Inside Leg 85 cm
Arm length 62 cm

Based on your experience, what is the best size for me? and with what Stem/Bar length and rise ?

thanks and sorry for my english :?

18" frame
150mm forks
720mm wide bars with 1" rise
50mm x 25 degree stem
420mm seat post

Worked very well for XC/downhill/jumps for me, look on page 2 for an example.

185cm rider, simular inside leg and arm length.

aidieb

Mr.Evil wrote:

Hi all
I need some advice ...
I want to buy a OnOne Carbon 456, but I don't know which one to choose between the 18 and 20 inches.
those are my measurements:
Height 185 cm
Inside Leg 85 cm
Arm length 62 cm

Based on your experience, what is the best size for me? and with what Stem/Bar length and rise ?

thanks and sorry for my english :?

Your English is better than some English peoples!

I'm 187cm and I ride a Medium, very comfortably, I have a straight 400mm seatpost which I bought because I'm tall riding a medium frame but it appears to not have been really necessary and a 75mm on one CNC stem. They have very long top tubes & that's why I chose the M. I would say if you ride a L on a normal geo MTB I think you'd be fine on a medium, C456.

Hope that helps a little.

Plyphon

BlueAdvocate

Plyphon wrote:

looking good, now where do you avoid the snow
last week


this week

Plyphon

wow aha. tbh i'd rather the snow than the absolute boggy standing 6 inches of water mess that my local rides are right now.

Mr.Evil

MrPhil wrote:

18" frame
150mm forks
720mm wide bars with 1" rise
50mm x 25 degree stem
420mm seat post

Worked very well for XC/downhill/jumps for me, look on page 2 for an example.

185cm rider, simular inside leg and arm length.

aidieb wrote:

I'm 187cm and I ride a Medium, very comfortably, I have a straight 400mm seatpost which I bought because I'm tall riding a medium frame but it appears to not have been really necessary and a 75mm on one CNC stem. They have very long top tubes & that's why I chose the M. I would say if you ride a L on a normal geo MTB I think you'd be fine on a medium, C456.

Hope that helps a little.

thanks guys

two hit for the 18".
I think that in a few days I will order one too.

Plyphon

Mines an 18, and i'm 6.1 ft. Fits perfectly imo.

JMcP92

Frame: On-One Carbon 456 (Gloss Black) (18")
Forks: RockShox Revelation XX World Cup Dual air 150mm
Chainset: FSA K-force light MegaExo
Cassette: Shimano HG62
Front Mech: Shimano XT M781
Chain: KMC 10spd
Shifters: Shimano SLX M660 10-Speed Shifters
Rear Mech: Shimano XT M780
Front Brake: Avid Juicy 7 Ultimate (180 Superstar rotor)
Rear Brake: Avid Juicy 7 Ultimate (160 Superstar rotor)
Headset: Superstar T2
Handle Bars: Easton E70 Monkeybar
Grips: ODI Troy Lee Designs
Seatpost: Gravity Gap
Seat-Post Clamp: Hope
Saddle: Charge Spoon
Pedals: Superstar NC17 Magnesium flat pedals (ti axles)
Axles: Superstar (9mm front, 10mm rear)
Wheelset: Stans Crest + Pro Evo 2 hubs
Tyres: Maxxis Medusa Tubeless


Also, to add to the frame arguments, I have to say I'm 6ft on the dot, that's an 18" frame and first ride today, seems perfectly fine. I used to have a 21.5" frame before it got nicked, but it's perfectly good, not too small or anything

paulneenan76

That c456, my friend, is bloody lovely. Nice one JMcP92.

And I'm about 5.11 and my c456 is 18" with a 60mm stem.

Paul

BlueAdvocate

JMcP92 - very nice.

Sizing info
5'8 and a bit (it's important) 16" frame, 35mm stem

levolon

heres my 456 and a first post

not a bad frame and a good all round bike for my riding

mostly slx deore and superstar fettled with a dropper and sektor 150mm single air with 20mm axle

mavic 717's are light and seem strong enough for what i do.

pastey_boy

Heres one I built for a customer using a Saracen Zen as a donor bike. All the bits inc cables swapped straight over except the lower headset cup so a Hope bottom cup did the trick. Frame was £399, Saracen £499,Hope bottom cup £25. I'm building his mate the exact same bike using the orange carbon 456. And as an added bonus I now have two 14inch Saracen Zen frames !!!!!!!

Mr.Evil

pastey_boy wrote:

Heres one I built for a customer using a Saracen Zen as a donor bike. All the bits inc cables swapped straight over except the lower headset cup so a Hope bottom cup did the trick. Frame was £399, Saracen £499,Hope bottom cup £25. I'm building his mate the exact same bike using the orange carbon 456. And as an added bonus I now have two 14inch Saracen Zen frames !!!!!!!

when you're done, can you post some pictures of the orange version ?

I'm very interested in this color, but I haven't found yet a photo of a mounted orange frame :roll:

pastey_boy

Mr.Evil wrote:

pastey_boy wrote:

Heres one I built for a customer using a Saracen Zen as a donor bike. All the bits inc cables swapped straight over except the lower headset cup so a Hope bottom cup did the trick. Frame was £399, Saracen £499,Hope bottom cup £25. I'm building his mate the exact same bike using the orange carbon 456. And as an added bonus I now have two 14inch Saracen Zen frames !!!!!!!

when you're done, can you post some pictures of the orange version ?

I'm very interested in this color, but I haven't found yet a photo of a mounted orange frame :roll:

Yeah no worries, should be done on monday. I have to say that both the orange and yellow frames look awesome in the flesh and I reckon both look good with white or black componentry.

MrPhil

Missing my C456 after seeing these new build. Lookin good though.

Ceed

Hi all
I need some advice ...
I want to buy a OnOne Carbon 456, but I don't know which one to choose between the 16 and 18 inches.

those are my measurements:
Height 181 cm
Inside Leg 80.5 cm

Based on your experience, what is the best size for me? and with what Stem/Bar length and rise ?

thanks and sorry for my english

paulneenan76

Ceed wrote:

Hi all
I need some advice ...
I want to buy a OnOne Carbon 456, but I don't know which one to choose between the 16 and 18 inches.

those are my measurements:
Height 181 cm
Inside Leg 80.5 cm

Based on your experience, what is the best size for me? and with what Stem/Bar length and rise ?

thanks and sorry for my english

What size frame do you ride currently and what is the top tube length?

The difference between 16", 18" and 20" 456 frames is not huge which is why 18" tends to suit a wide range of body sizes.

levolon

Ceed wrote:

Hi all
I need some advice ...
I want to buy a OnOne Carbon 456, but I don't know which one to choose between the 16 and 18 inches.

those are my measurements:
Height 181 cm
Inside Leg 80.5 cm

Based on your experience, what is the best size for me? and with what Stem/Bar length and rise ?

thanks and sorry for my english

you will be fine with the 18 as your 6 foot

i have a 16 frame and im 5"8 , my sons 18 is a tad too big and he is around 6 foot too

id go for a 50mm stem or there about's but its a personal choice really

Ceed

On-One Smoothie Mixer Tapered Headset Include both 1-1/8 crown race and 1-1/2 crown race?



Or 1-1/2 crown race Buy Seperately?

Ceed

paulneenan76 wrote:

Ceed wrote:

Hi all
I need some advice ...
I want to buy a OnOne Carbon 456, but I don't know which one to choose between the 16 and 18 inches.

those are my measurements:
Height 181 cm
Inside Leg 80.5 cm

Based on your experience, what is the best size for me? and with what Stem/Bar length and rise ?

thanks and sorry for my english

What size frame do you ride currently and what is the top tube length?

The difference between 16", 18" and 20" 456 frames is not huge which is why 18" tends to suit a wide range of body sizes.

17.5" Frame, actual top tube length 570mm

Ceed

B Type Is Caliper inner Mount



B2 Type is Caliper Outer Mount

is it correct?