Wingnuts
pottssteve
Posts: 4,069
Hi,
I have a Fuji Feather fixie and want to be able to take the front wheel off quickly for transport. I am told that the wheels- Alex double wall, 32h, high-flange alloy sealed bearing hubs - are not compatible with quick release skewers.
My second option is a wing nut so I don't have to carry a spanner, and would be very grateful if anyone could give advice as to where I might source a suitable one. I had wing nuts on an old 1980's city bike that I used in the Netherlands but some feckker stole it.
Thanks in advance,
Steve
I have a Fuji Feather fixie and want to be able to take the front wheel off quickly for transport. I am told that the wheels- Alex double wall, 32h, high-flange alloy sealed bearing hubs - are not compatible with quick release skewers.
My second option is a wing nut so I don't have to carry a spanner, and would be very grateful if anyone could give advice as to where I might source a suitable one. I had wing nuts on an old 1980's city bike that I used in the Netherlands but some feckker stole it.
Thanks in advance,
Steve
Head Hands Heart Lungs Legs
0
Comments
-
-
pottssteve wrote:Hi,
I have a Fuji Feather fixie and want to be able to take the front wheel off quickly for transport. I am told that the wheels- Alex double wall, 32h, high-flange alloy sealed bearing hubs - are not compatible with quick release skewers.
My second option is a wing nut so I don't have to carry a spanner, and would be very grateful if anyone could give advice as to where I might source a suitable one. I had wing nuts on an old 1980's city bike that I used in the Netherlands but some feckker stole it.
Thanks in advance,
Steve
Sounds like nonsense has occurred somewhere.0 -
https://www.ebay.co.uk/i/202536837510?c ... LdEALw_wcB
You will need two - one on its own will not work.0 -
First Aspect wrote:pottssteve wrote:Hi,
I have a Fuji Feather fixie and want to be able to take the front wheel off quickly for transport. I am told that the wheels- Alex double wall, 32h, high-flange alloy sealed bearing hubs - are not compatible with quick release skewers.
My second option is a wing nut so I don't have to carry a spanner, and would be very grateful if anyone could give advice as to where I might source a suitable one. I had wing nuts on an old 1980's city bike that I used in the Netherlands but some feckker stole it.
Thanks in advance,
Steve
Sounds like nonsense has occurred somewhere.0 -
First Aspect wrote:I stand corrected. They actually do still make fixed axle hubs. Perhaps I can still get spares for the 3 speed bike I had as a child. Seat should still go high enough..
I believe this is for a threaded axle track hub - there was a discussion about it over on the track forum, assuming this is the same issue..0 -
Imposter wrote:First Aspect wrote:I stand corrected. They actually do still make fixed axle hubs. Perhaps I can still get spares for the 3 speed bike I had as a child. Seat should still go high enough..
I believe this is for a threaded axle track hub - there was a discussion about it over on the track forum, assuming this is the same issue..
Hovis.0 -
Imposter wrote:First Aspect wrote:I stand corrected. They actually do still make fixed axle hubs. Perhaps I can still get spares for the 3 speed bike I had as a child. Seat should still go high enough..
I believe this is for a threaded axle track hub - there was a discussion about it over on the track forum, assuming this is the same issue..
Hi, yes, its the same issue. I am now confused - can I just use a regular front wheel skewer to fool the wheel into not falling out or not? :?
Maybe I just need to ride it to my LBS and see if they can sort me out?Head Hands Heart Lungs Legs0 -
No. You can't use any skewer with a track axle. There is no hole through the middle. You need a different front axle but which one will depend on your particular hub.
No disrespect intended, but you seem to have minimal technical or practical knowledge so your suggestion of asking LBS to help is probably your best solution.0 -
Franco di Banco wrote:No. You can't use any skewer with a track axle. There is no hole through the middle. You need a different front axle but which one will depend on your particular hub.
No disrespect intended, but you seem to have minimal technical or practical knowledge so your suggestion of asking LBS to help is probably your best solution.
No offence taken. I have the technical ability of a banana. I assumed it would be an easy fix but I will do more research and take a ride to my LBS to see if they can sort me out. If not I will be riding with a spanner in my back pocket.
Thanks to everyone who has offered advice.
SteveHead Hands Heart Lungs Legs0 -
pottssteve wrote:Imposter wrote:First Aspect wrote:I stand corrected. They actually do still make fixed axle hubs. Perhaps I can still get spares for the 3 speed bike I had as a child. Seat should still go high enough..
I believe this is for a threaded axle track hub - there was a discussion about it over on the track forum, assuming this is the same issue..
Hi, yes, its the same issue. I am now confused - can I just use a regular front wheel skewer to fool the wheel into not falling out or not? :?
Maybe I just need to ride it to my LBS and see if they can sort me out?
As already explained to you on the other thread - no. You already said you had a threaded track hub, so it will only accept 9mm track nuts, or equivalent wing nuts, which will facilitate removal without the use of a 15mm spanner.
There really isn't any need to do 'more research'. By all means ride it to your LBS - but they will tell you exactly the same thing.0 -
Don't feel bad about being a banana. They are more genetically complex than humans.0
-
First Aspect wrote:Don't feel bad about being a banana. They are more genetically complex than humans.
Absolutely. I'll be voting 'banana' in the next general election...0 -
Imposter wrote:First Aspect wrote:Don't feel bad about being a banana. They are more genetically complex than humans.
Absolutely. I'll be voting 'banana' in the next general election...0 -
Imposter wrote:pottssteve wrote:Imposter wrote:First Aspect wrote:I stand corrected. They actually do still make fixed axle hubs. Perhaps I can still get spares for the 3 speed bike I had as a child. Seat should still go high enough..
I believe this is for a threaded axle track hub - there was a discussion about it over on the track forum, assuming this is the same issue..
Hi, yes, its the same issue. I am now confused - can I just use a regular front wheel skewer to fool the wheel into not falling out or not? :?
Maybe I just need to ride it to my LBS and see if they can sort me out?
As already explained to you on the other thread - no. You already said you had a threaded track hub, so it will only accept 9mm track nuts, or equivalent wing nuts, which will facilitate removal without the use of a 15mm spanner.
There really isn't any need to do 'more research'. By all means ride it to your LBS - but they will tell you exactly the same thing.
Yes, thanks. By "more research" I meant finding where I could obtain said wing nuts. I live in HK so I suspect my LSB might struggle to supply them.......
SteveHead Hands Heart Lungs Legs0 -
just go to the local nut and bolt factor and get them off the shelf.
its a set of wing nuts not a flux capacitor.Postby team47b » Sun Jun 28, 2015 11:53 am
De Sisti wrote:
This is one of the silliest threads I've come across.
Recognition at last Matthew, well done!, a justified honoursmithy21 wrote:
He's right you know.0 -
Matthewfalle wrote:just go to the local nut and bolt factor and get them off the shelf.
its a set of wing nuts not a flux capacitor.
make sure you upgrade your fingers to get them loose or tight enough too0 -
I live in HK so I suspect my LSB might struggle to supply them.......
They all come from China.......0 -
How often are you taking the wheel off ? So long as you have the spanner - it's going to be as quick as the wingnuts.0
-
Slowbike wrote:Fenix wrote:How often are you taking the wheel off ? So long as you have the spanner - it's going to be as quick as the wingnuts.
I fail to see how a bike wheel or indeed bike is less cumbersome than a spanner - but each to their own.0 -
Fenix wrote:Slowbike wrote:Fenix wrote:How often are you taking the wheel off ? So long as you have the spanner - it's going to be as quick as the wingnuts.
I fail to see how a bike wheel or indeed bike is less cumbersome than a spanner - but each to their own.
I'd be happy with wingnuts on Little Slowbikes wheel - currently has a 17mm follow-me nut on the front wheel - we risk it.0 -
I thought it was Steve Potts that has the issue ?
When I'm riding my fixed wheel bike I've no option but to carry spanners. They fit down the side of my saddle pack.
It's either that or be prepared to walk a looong way home.0 -
If you don't carry spanners on a fixie then you've no chance of mending a puncture.0
-
Franco di Banco wrote:If you don't carry spanners on a fixie then you've no chance of mending a puncture.
Agreed, I carry a 15mm spanner, a proper one not a thin metal thing. cheap as chips about £3. SA3 speed id be even messier and longer to change without it.
I also carry a couple of latex gloves incase its the back wheel that punctures because its a dirty PIA.0 -
Always carry latex gloves. Cheap as chips, weigh nothing and are invaluable when messing with rear wheel, chains or anything else covered in cr@p0
-
get spanner
drill two holes in it
two M5 bolts into bottle cage bolts
stick small allen key into back pocket
sortedPostby team47b » Sun Jun 28, 2015 11:53 am
De Sisti wrote:
This is one of the silliest threads I've come across.
Recognition at last Matthew, well done!, a justified honoursmithy21 wrote:
He's right you know.0 -
Felt Despatch s/s came with the above as standard but one end was a box spanner, the other a bottle opener.Postby team47b » Sun Jun 28, 2015 11:53 am
De Sisti wrote:
This is one of the silliest threads I've come across.
Recognition at last Matthew, well done!, a justified honoursmithy21 wrote:
He's right you know.0 -
Alejandrosdog wrote:Matthewfalle wrote:just go to the local nut and bolt factor and get them off the shelf.
its a set of wing nuts not a flux capacitor.
make sure you upgrade your fingers to get them loose or tight enough too
#powerfingersofpowerPostby team47b » Sun Jun 28, 2015 11:53 am
De Sisti wrote:
This is one of the silliest threads I've come across.
Recognition at last Matthew, well done!, a justified honoursmithy21 wrote:
He's right you know.0 -
Matthewfalle wrote:Alejandrosdog wrote:Matthewfalle wrote:just go to the local nut and bolt factor and get them off the shelf.
its a set of wing nuts not a flux capacitor.
make sure you upgrade your fingers to get them loose or tight enough too
#powerfingersofpower
#powerfingering0 -
Just carry one of these: https://www.condorcycles.com/products/p ... s-3wrencho
...and a pump and an inner tube, obvs.0