Seemingly trivial things that cheer you up

1211212214216217413

Comments

  • briantrumpet
    briantrumpet Posts: 20,350
    pblakeney said:

    Books will be coming together in the middle sometime fairly soon.

    Wanna bet? That's one solid bit of timber there. Anyway, I only read lightweight books.
  • rjsterry
    rjsterry Posts: 29,554
    edited July 2021

    rjsterry said:

    Haha, more bookshelves... I thought this would be easy, batten either end, plank between, just needed to get the angles right. What I'd forgotten to check was that the inside and outside surfaces of the alcove were parallel... they aren't, and neither are the side surfaces actually straight. And then drilling old limestone walls to put in the rawlplugs was slightly more approximate than planned. A few matchsticks sorted that out.

    And at least I've got one up, and have a better plan for getting the other two a bit less wonky. It'll do, though, and that cheers me up. :)




    No batten across the back?
    I used 1/4" bead for the battens and routed out a channel in 1" MDF to make our shelves, invisible supports. But as with Brian the alcoves not being square is a complete pain in the aris'.
    Very nice. Nobody wants to see fixings. A bookshelf in a wonky alcove would make a perfect teaching aid on the importance of tolerances and measuring accuracy for our junior staff. If you had the time and tools you could use slightly larger battens and scribe them to the walls.
    1985 Mercian King of Mercia - work in progress (Hah! Who am I kidding?)
    Pinnacle Monzonite

    Part of the anti-growth coalition
  • veronese68
    veronese68 Posts: 27,816
    rjsterry said:

    rjsterry said:

    Haha, more bookshelves... I thought this would be easy, batten either end, plank between, just needed to get the angles right. What I'd forgotten to check was that the inside and outside surfaces of the alcove were parallel... they aren't, and neither are the side surfaces actually straight. And then drilling old limestone walls to put in the rawlplugs was slightly more approximate than planned. A few matchsticks sorted that out.

    And at least I've got one up, and have a better plan for getting the other two a bit less wonky. It'll do, though, and that cheers me up. :)




    No batten across the back?
    I used 1/4" bead for the battens and routed out a channel in 1" MDF to make our shelves, invisible supports. But as with Brian the alcoves not being square is a complete pain in the aris'.
    Very nice. Nobody wants to see fixings. A bookshelf in a wonky alcove would make a perfect teaching aid on the importance of tolerances and measuring accuracy for our junior staff. If you had the time and tools you could use slightly larger battens and scribe them to the walls.
    Thankfully the back of the alcove was narrower than the front, the other way round would make sliding the shelf in rather tricky to say the least.
  • pblakeney
    pblakeney Posts: 27,329

    pblakeney said:

    Books will be coming together in the middle sometime fairly soon.

    Wanna bet? That's one solid bit of timber there. Anyway, I only read lightweight books.
    Based on personal experience. Worst case scenario, replace in time.
    Only question is how long. I'm talking 20 years. 😉
    The above may be fact, or fiction, I may be serious, I may be jesting.
    I am not sure. You have no chance.
    Veronese68 wrote:
    PB is the most sensible person on here.
  • pinno
    pinno Posts: 52,322
    Like PB, I think that will warp.

    I used 38mm Beech block laminate, Walnut (off cuts from the kitchen worktops), some Cherry. I even have some Oak.
    I used 10mm wooden doweling and grab adhesive plus brackets. Super strong - jars and heavy cook books.
    Some examples:





    seanoconn - gruagach craic!
  • pblakeney
    pblakeney Posts: 27,329
    It is so long since I had to use this, so the figure may be out a bit .
    From memory, distance between supports 0.625x total length?

    What is really annoying is that I knew this off the top of my head 40 years ago, yet Google can't find the simple ratio. Also depends on equal loading.
    The above may be fact, or fiction, I may be serious, I may be jesting.
    I am not sure. You have no chance.
    Veronese68 wrote:
    PB is the most sensible person on here.
  • briantrumpet
    briantrumpet Posts: 20,350
    pblakeney said:

    It is so long since I had to use this, so the figure may be out a bit .
    From memory, distance between supports 0.625x total length?

    What is really annoying is that I knew this off the top of my head 40 years ago, yet Google can't find the simple ratio. Also depends on equal loading.


    Even if I don't think they'll sag, I have a plan. TBH, I don't want to go drilling in the back wall, as it's exterior, is filling what was once a hole in the wall, and I've no idea if it's straw held together with pig slurry (I've still got the pig trough in the basement).

    So I'm going to put in central vertical dividers, from the floor up. Being under compression, they won't need to be too chunky.
  • pinno
    pinno Posts: 52,322
    edited July 2021
    There is another way...
    Put a strip of wood along the front of that shelf.
    You can screw it in from above and or glue it in.
    If you want, you can add one at the back which you'll hardly see.
    You can also recess the strip (5mm?) which gives it a bit more design.

    A tight fit will mean that it can't warp (as long as you have one front and back) as there can be no lateral movement. It also means you do not have to deploy unsightly uprights that also lose space.
    seanoconn - gruagach craic!
  • briantrumpet
    briantrumpet Posts: 20,350
    pinno said:

    There is another way...
    Put a strip of wood along the front of that shelf.
    You can screw it in from above and or glue it in.
    If you want, you can add one at the back which you'll hardly see.
    You can also recess the strip (5mm?) which gives it a bit more design.

    A tight fit will mean that it can't warp (as long as you have one front and back) as there can be no lateral movement. It also means you do not have to deploy unsightly uprights that also lose space.

    Possibly, but actually vertical dividers in bookshelves are quite useful.

    Anyway, have got the bottom two shelves in now, much more accurately, having made a wooden template for the angles each side, for each shelf.

    I'm aware that it's quite 'rustic' in design and execution, compared with what some of you would do... but then, I'm quite rustic in design and execution too, and given I don't do much bricolage, I'm quite happy with it.




  • Pross
    Pross Posts: 43,463
    Someone has mentioned this before I think but the funicular railway in Lynmouth. Such a simple concept that just works.
  • pinno
    pinno Posts: 52,322
    seanoconn - gruagach craic!
  • veronese68
    veronese68 Posts: 27,816
    That really is mind boggling
  • lesfirth
    lesfirth Posts: 1,382
    That does not cheer me up at all. I am amazed at the skill involved but I was also amazed at the skill of Martyn Ashton.
  • pinno
    pinno Posts: 52,322

    That really is mind boggling

    More mind boggling was his (other) trip to Skye:
    https://www.youtube.com/watch?v=4Ym2F-tHdkk
    seanoconn - gruagach craic!
  • pblakeney
    pblakeney Posts: 27,329
    The boy's going to do himself an injury cycling like that.
    The above may be fact, or fiction, I may be serious, I may be jesting.
    I am not sure. You have no chance.
    Veronese68 wrote:
    PB is the most sensible person on here.
  • briantrumpet
    briantrumpet Posts: 20,350
    Searching out roads I've not ridden before, and finding a col there I didn't know existed.


  • pinno
    pinno Posts: 52,322
    Is that gravel BT?
    seanoconn - gruagach craic!
  • pinno
    pinno Posts: 52,322
    edited July 2021
    pblakeney said:

    The boy's going to do himself an injury cycling like that.

    Probably.
    I hope he doesn't end up like Martyn Ashton
    seanoconn - gruagach craic!
  • briantrumpet
    briantrumpet Posts: 20,350
    pinno said:

    Is that gravel BT?

    Non, monsieur ! Some of these 'secondary cols', which don't necessarily stay open through the winter, have a more gravelly surface, so you've got to look extra carefully for loose gravel, but it is a proper road.

    Approaching a col and looking forward to a long speedy descent, then to be confronted with signs that tell you there's going to be 'gravillons' starting at the summit definitely deserves to go in the annoyances thread, though it's not trivial.
  • orraloon
    orraloon Posts: 13,227
    Get a gravel bike BT, you know you want to. Go on, go on, go on.

    In other cheery news, Niggly Fartrage and similar fascist ilk's criticism of the RNLI causes massive spike in donations to the charity.

    https://www.bbc.co.uk/news/uk-politics-58009646

    See, there are good people out there, we are not all Gammonati.

  • ballysmate
    ballysmate Posts: 15,930
    edited July 2021
    orraloon said:

    Get a gravel bike BT, you know you want to. Go on, go on, go on.

    In other cheery news, Niggly Fartrage and similar fascist ilk's criticism of the RNLI causes massive spike in donations to the charity.

    https://www.bbc.co.uk/news/uk-politics-58009646

    See, there are good people out there, we are not all Gammonati.


    Yes Loon, there are good people out there. The fact that donations went up doesn't surprise me.
    It seems that within the EU, only the people Sweden and the Netherlands were more comfortable having immigrants as friends than than we were in the UK. Same with work colleagues.

    Who says so? Why, a report commissioned for the European Commission,
    Directorate-General for Migration and Home Affairs.

    http://www.europeanmigrationlaw.eu/documents/EuroBarometer-IntegrationOfMigrantsintheEU.pdf

    Or this report, with only Canada and Australia viewing immigrants more positively than the UK. As for the other countries in the Eu....oh dear.

    https://www.pewresearch.org/global/2019/03/14/around-the-world-more-say-immigrants-are-a-strength-than-a-burden/
  • surrey_commuter
    surrey_commuter Posts: 18,867

    orraloon said:

    Get a gravel bike BT, you know you want to. Go on, go on, go on.

    In other cheery news, Niggly Fartrage and similar fascist ilk's criticism of the RNLI causes massive spike in donations to the charity.

    https://www.bbc.co.uk/news/uk-politics-58009646

    See, there are good people out there, we are not all Gammonati.


    Yes Loon, there are good people out there. The fact that donations went up doesn't surprise me.
    It seems that within the EU, only the people Sweden and the Netherlands were more comfortable having immigrants as friends than than we were in the UK. Same with work colleagues.

    Who says so? Why, a report commissioned for the European Commission,
    Directorate-General for Migration and Home Affairs.

    http://www.europeanmigrationlaw.eu/documents/EuroBarometer-IntegrationOfMigrantsintheEU.pdf

    Or this report, with only Canada and Australia viewing immigrants more positively than the UK. As for the other countries in the Eu....oh dear.

    https://www.pewresearch.org/global/2019/03/14/around-the-world-more-say-immigrants-are-a-strength-than-a-burden/
    I don’t know many people pro -Brexit but it does intrigue me that the ones on here seem to becoming more obsessed with framing everything through an EU lens.
  • rick_chasey
    rick_chasey Posts: 75,661
    edited July 2021



    I don’t know many people pro -Brexit but it does intrigue me that the ones on here seem to becoming more obsessed with framing everything through an EU lens.

    Is it just not that it's hard to deny the lack of sunlit uplands, or indeed deny that there are empty supermarket shelves, so you need to focus your attention on it all being worse elsewhere?

    Hence all the "thank brexit for the vaccine" chat, which is no different to the "£350m a year" chat. ie. a wilful misunderstanding of how it all works.

    I also think for those people who have read the nonsense the telegraph et all would make up about the EU for 20 years or so, it's quite hard to suddenly see them as anything other than the bogeyman.
  • orraloon
    orraloon Posts: 13,227
    Positive view of migrants being pushed no doubt by disgraced former International Development Secretary Priti Vacant's current goon squad. Viz:

    https://www.bbc.co.uk/news/uk-58019981

  • rick_chasey
    rick_chasey Posts: 75,661



    I don’t know many people pro -Brexit but it does intrigue me that the ones on here seem to becoming more obsessed with framing everything through an EU lens.

    Is it just not that it's hard to deny the lack of sunlit uplands, or indeed deny that there are empty supermarket shelves, so you need to focus your attention on it all being worse elsewhere?

    Hence all the "thank brexit for the vaccine" chat, which is no different to the "£350m a year" chat. ie. a wilful misunderstanding of how it all works.

    I also think for those people who have read the nonsense the telegraph et all would make up about the EU for 20 years or so, it's quite hard to suddenly see them as anything other than the bogeyman.
    Anyway, this nonsense does not cheer me up.

    The Olympics however - trivial but very enjoyable. Always love it.
  • surrey_commuter
    surrey_commuter Posts: 18,867



    I don’t know many people pro -Brexit but it does intrigue me that the ones on here seem to becoming more obsessed with framing everything through an EU lens.

    Is it just not that it's hard to deny the lack of sunlit uplands, or indeed deny that there are empty supermarket shelves, so you need to focus your attention on it all being worse elsewhere?

    Hence all the "thank brexit for the vaccine" chat, which is no different to the "£350m a year" chat. ie. a wilful misunderstanding of how it all works.

    I also think for those people who have read the nonsense the telegraph et all would make up about the EU for 20 years or so, it's quite hard to suddenly see them as anything other than the bogeyman.
    I think it is simpler than that. They assess you being in favour of membership of the EU through their hatred of all things EU so come to the conclusion that you “love the EU and everything about it.
  • TheBigBean
    TheBigBean Posts: 21,916

    orraloon said:

    Get a gravel bike BT, you know you want to. Go on, go on, go on.

    In other cheery news, Niggly Fartrage and similar fascist ilk's criticism of the RNLI causes massive spike in donations to the charity.

    https://www.bbc.co.uk/news/uk-politics-58009646

    See, there are good people out there, we are not all Gammonati.


    Yes Loon, there are good people out there. The fact that donations went up doesn't surprise me.
    It seems that within the EU, only the people Sweden and the Netherlands were more comfortable having immigrants as friends than than we were in the UK. Same with work colleagues.

    Who says so? Why, a report commissioned for the European Commission,
    Directorate-General for Migration and Home Affairs.

    http://www.europeanmigrationlaw.eu/documents/EuroBarometer-IntegrationOfMigrantsintheEU.pdf

    Or this report, with only Canada and Australia viewing immigrants more positively than the UK. As for the other countries in the Eu....oh dear.

    https://www.pewresearch.org/global/2019/03/14/around-the-world-more-say-immigrants-are-a-strength-than-a-burden/
    I don’t know many people pro -Brexit but it does intrigue me that the ones on here seem to becoming more obsessed with framing everything through an EU lens.
    I posted that truck drivers are doing well. What more do you want?

    On a serious note, it does appear to be driving up wages in some sectors which should lead to productivity improvements.
  • pblakeney
    pblakeney Posts: 27,329
    Confused by the question - "Have you ever met a man who admits to being five foot ten?" I am 5 foot ten.
    The above may be fact, or fiction, I may be serious, I may be jesting.
    I am not sure. You have no chance.
    Veronese68 wrote:
    PB is the most sensible person on here.