Cannondale Rize , work in progress (WIP) update few pic
Comments
-
Up date later guys and girls !!! Keep an eye out lol
0 -
XTR next to the old XT !
Then XTR in the hand lol very nice finish and very ligth !
I did needed a hand to but on as its not straight forward lol
Then we got it on !
Next to the mint epic !!! Very fast bike indeed !
0 -
Very nice build there buddy,
I bet that weighs light on the scales.. Xtr a lot lighter than XT variant..0 -
Last weighting was 25.64 pounds !!! I.m very happy 0
-
In need of some ti bolts next !0
-
Now fitted with gold TI rotor bolts ! Will upload pic later 0
-
Pics?0
-
Well you all wanted to see the bike dirty !! Here ya go ,after a 25mile biker ride on Salisbury plain with raceface gt !
First if my new TI rotor bolts
And here few pic for you guys ! Nice and dirty
Out and about
Cleaned down ready for drying and lube up ,with out ash being in the way
0 -
Really nice build, where did you get your seatpost from?0
-
Hahahah I had a nightmare with that one !! I order from 3 to 4 company and kept getting the new type even they advertise the old raceface seat pin ! So I kept sending them back ! By the end I found a shop on eBay from America ! They were very helpfull and send me the pic of the seat post before they send it to me , I believe this seat pin is very rare in uk ! It's the old model now and hard to get old off now ! Unless ya find a used one on eBay , if you need any detail of the seller happy to help you buddyWindyG wrote:Really nice build, where did you get your seatpost from? 0 -
Yeah I'd be interested in the seller details, the old model looks so much better, cheers.0
-
I pm ed ya the Linky buddyWindyG wrote:Yeah I'd be interested in the seller details, the old model looks so much better, cheers.0 -
And now cleaner then ever !!!
0 -
Tintin rize wrote:
I pm ed ya the Linky buddyWindyG wrote:Yeah I'd be interested in the seller details, the old model looks so much better, cheers.
Big thank you.0 -
The RIZE specs as it is now !
Frame Cannondale RIZE / RZ
XTR Shifters m970
XTR front mech m970 ( with TI bolt )
XTR Crank m970
XTR rear mech carbon m972
Raceface Next carbon handle bar
Raceface Next carbon SL seatpost
Avid elixir CR brakes
Aligator windcutter 160mm front and rear
Fsa OS150 stem carbon cap ( will be changing soon )
KCNC foam grips
KCNC rear mech jockey wheels nuts
Token carbon spacers
Token seat post clamp ( with TI bolt )
Token QRs TI MTB (38g PAIR )
12x gold TI rotor Bolts
Mavic XM 317 wheels (will be changing soon )
Dt Swiss 370 hubs ( will be changing soon )
Schwalbe rocket Ron rubber
Fork FOX Float 140mm RL 32
Rear Shock Fox RP2
Rear cassette SRAM p990 red spider
Ashima bolts in water bottle place and in xtr shifters,
Weigth so far 25.64 pounds0 -
how are you finding the rotors?0
-
TBH ! They are alrite very light, 160mm weighing in at 95g on my scale , I got them second hand and they were a bit hard to bed in with my pads ! But after a long ride and bit of mud between the rotor and pads they work pretty well ! However I be going float hope soon I think, as I got a store chip on the back one and that course the red paint to start chipping away badly ! That the only down side on those rotors is , they not anodise ! They painted !70\'sPenguin wrote:how are you finding the rotors?0 -
Hohhot what gonna be new today ?0
-
And it is !!!!! Mavic 717xc rim with hope pro II hubs ! Will get pic up later on once as the wife not potted them yet lolgot them for a bargain from mine and raceface gt (LBS) used but in mint condition px for my old xm 317 with dt Swiss 370 hub . (No need for a bell on these bad boys lol )Tintin rize wrote:Hohhot what gonna be new today ?0 -
:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
Is that Surface Rust?
I don't know how you can sleep at night!
You probably won't be able to now
0 -
:shock: omg I will check that the bit !!!!Dirtydog11 wrote:
:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
Is that Surface Rust?
I don't know how you can sleep at night!
You probably won't be able to now
I think I be in need of some TI bolts 0 -
Tintin rize wrote:
:shock: omg I will check that the bit !!!!Dirtydog11 wrote:
:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
Is that Surface Rust?
I don't know how you can sleep at night!
You probably won't be able to now
I think I be in need of some TI bolts
I will bring scales...0 -
Bike new weigth ! 25.40 pounds that's 11.52kg happy with that 0
-
Here the new update new wheels mavic xc 717 with hope pro II
And just to add on , new rotors hope floating SAW in red
Still loads more to come 0 -
Why hope hubs if I may ask?
If you're going for ultimate weight savings there are a lot lighter hubs around-american classic, dt240, tune, a2z etc. The rims arent the lightest either...0 -
leaflite wrote:Why hope hubs if I may ask?
If you're going for ultimate weight savings there are a lot lighter hubs around-american classic, dt240, tune, a2z etc. The rims arent the lightest either...
I was looking around for slr and costom build rim and I.m still looking ! Also may go lefty one day ! I got these rim form my LBS who is also a mate , in exchange for my old set for an unbeatable price , it still a little upgrade 0 -
I think this bike NEEDS one of those carbon lefty forks! I have heard you cant turn right using them though.0
-
70\'sPenguin wrote:I think this bike NEEDS one of those carbon lefty forks! I have heard you cant turn right using them though.
And straight ! 0 -
Will upload some new pic today of the full bike side on ect 0
-
Tintin rize wrote:Will upload some new pic today of the full bike side on ect
Pics then0
