Pasteys new Azonic Avenger W.I.P.

124»

Comments

  • leaflite
    leaflite Posts: 1,651
    I know someone with a lime green 456 that has quite a few red parts on it, and it looks ace. As long as you keep the red parts fairly subtle(eg spoke nipples) it will probably look quite good.
  • pastey_boy
    pastey_boy Posts: 2,083
    leaflite wrote:
    I know someone with a lime green 456 that has quite a few red parts on it, and it looks ace. As long as you keep the red parts fairly subtle(eg spoke nipples) it will probably look quite good.
    best thing to do is slap it all together and see what happens, i will obviously change everything anyway during the few days i will have the bike. the gravity dropper post is a fair bit lighter than the ks on the azonic so realistically i reckon its going to weigh in at 26lbs give or take an ounce.
    Viner Salviati
    Shark Aero Pro
    Px Ti Custom
    Cougar 531
    Sab single speed
    Argon 18 E-112 TT
    One-one Ti 456 Evo
    Ridley Cheetah TT
    Orange Clockwork 2007 ltd ed
    Yeti ASR 5
    Cove Hummer XC Ti
  • leaflite
    leaflite Posts: 1,651
    pastey_boy wrote:
    leaflite wrote:
    I know someone with a lime green 456 that has quite a few red parts on it, and it looks ace. As long as you keep the red parts fairly subtle(eg spoke nipples) it will probably look quite good.
    best thing to do is slap it all together and see what happens, i will obviously change everything anyway during the few days i will have the bike. the gravity dropper post is a fair bit lighter than the ks on the azonic so realistically i reckon its going to weigh in at 26lbs give or take an ounce.

    Hmm, the titus is about 27 atm, with a very light frame but slightly heavier components than you have on this.
  • pastey_boy
    pastey_boy Posts: 2,083
    edited May 2012
    the prophet frame weighs in at 6.5lbs the azonic just over to 7lbs !!! plus the 100 grams saved on the dropper post. the azonic weighs in at just under 29lbs so subtract nearly 3lbs from the current build and its about right. the azonic does have some silly light gear on it and the 1 X 10 set up loses lots of weight too. i know it will be under 27 but until built i wont know for sure.
    Viner Salviati
    Shark Aero Pro
    Px Ti Custom
    Cougar 531
    Sab single speed
    Argon 18 E-112 TT
    One-one Ti 456 Evo
    Ridley Cheetah TT
    Orange Clockwork 2007 ltd ed
    Yeti ASR 5
    Cove Hummer XC Ti
  • Koconn123
    Koconn123 Posts: 8
    Hey there, I have this frame aswell, getting it build up at the moment. Just a quick question. How do the Schwalbe Nobby Nics ride? Im thinking of getting them. I ride alot of hardpack trails, with rocks and some roots. What you think? Are they suitable?
  • pastey_boy
    pastey_boy Posts: 2,083
    to be honest i prefer rocket rons to nobby's. much faster and just as grippy, having said that it depends on your weight i weigh between 17-18 stones and found the thin sdewalls folded on me, the snake skin casing remedies this. im in the process of rebuilding the azonic with mostly new bits. will post up pics when done.
    Viner Salviati
    Shark Aero Pro
    Px Ti Custom
    Cougar 531
    Sab single speed
    Argon 18 E-112 TT
    One-one Ti 456 Evo
    Ridley Cheetah TT
    Orange Clockwork 2007 ltd ed
    Yeti ASR 5
    Cove Hummer XC Ti
  • Koconn123
    Koconn123 Posts: 8
    I weigh between 11-12 stone, and have a maxxis minion dhf and high roller. They weigh just under 2.5 kilos (5.51lbs) together. Its ridiculous!
    I'm also in the process of building up my azonic. Getting some of the new Shimano Saint m820 parts. Can't Wait!