The "I have just ordered..." thread

1175176178180181235

Comments

  • rgliniany
    rgliniany Posts: 753
    Just bought one of these because I'm too tight for a reverb

    236_CONTACT_SWITCH.jpg

    just use more lube.... you'll get a bit of refusal at first but persevere and it'll slide right in.... :lol:
    It's a boy , It's a boy , I Shouted Running Into The Street With Tears Running Down My Face.....

    That's The Last Time I Holiday In Thailand

    URL Pinkbike
  • Anonymous
    Anonymous Posts: 79,667
    jus ordered new tyres

    2 Intense Tyre Systems XC System C3 Wire Tyre - 26

    from CRC

    payed for tracked quick service for £5.99 better be here tomorrow I got a couple days of work and want to test the tyres out of road
  • peter413
    peter413 Posts: 5,120
    Just ordered some Raceface Sixc bars. They've been tempting me at Merlin for months and finally gave in as a birthday treat. They're white instead of red but can't really complain for £76. First ever bit of carbon for a MTB.
  • VWsurfbum
    VWsurfbum Posts: 7,881
    Ordered through my sponsor ;) some new maxxis ardent lusts in 2.35 flavour :)
    Kazza the Tranny
    Now for sale Fatty
  • Thewaylander
    Thewaylander Posts: 8,594
    That the misses?
  • welshkev
    welshkev Posts: 9,690
    peter413 wrote:
    Just ordered some Raceface Sixc bars. They've been tempting me at Merlin for months and finally gave in as a birthday treat. They're white instead of red but can't really complain for £76. First ever bit of carbon for a MTB.

    I have to be honest, carbon bars are probably the last thing i'd go for. just me though :lol:
  • VWsurfbum
    VWsurfbum Posts: 7,881
    That the misses?
    LOL not quite, but it does give me a license under "The Sponser got them for me" banner
    Kazza the Tranny
    Now for sale Fatty
  • Anonymous
    Anonymous Posts: 79,667
    jus ordered new tyres

    2 Intense Tyre Systems XC System C3 Wire Tyre - 26

    from CRC

    payed for tracked quick service for £5.99 better be here tomorrow I got a couple days of work and want to test the tyres out of road

    jus got a email saying they have been dispatched :D

    jus brought and fitted front mud guard

    soon as tyre's arrive will fit them then im ready to get down the forest and get muddy :D:D:D:D:D:D
  • peter413
    peter413 Posts: 5,120
    welshkev wrote:
    peter413 wrote:
    Just ordered some Raceface Sixc bars. They've been tempting me at Merlin for months and finally gave in as a birthday treat. They're white instead of red but can't really complain for £76. First ever bit of carbon for a MTB.

    I have to be honest, carbon bars are probably the last thing i'd go for. just me though :lol:

    How so? Don't trust carbon?
  • welshkev
    welshkev Posts: 9,690
    peter413 wrote:
    welshkev wrote:
    peter413 wrote:
    Just ordered some Raceface Sixc bars. They've been tempting me at Merlin for months and finally gave in as a birthday treat. They're white instead of red but can't really complain for £76. First ever bit of carbon for a MTB.

    I have to be honest, carbon bars are probably the last thing i'd go for. just me though :lol:

    How so? Don't trust carbon?

    I saw a video once of a guy riding, in Scotland I think it was. And he took a tumble and his bars snapped. There was a guy laughing saying something about carbon bars iirc.
  • welshkev
    welshkev Posts: 9,690

    I can't watch it on my phone but reading the blurb at the bottom that's the one
  • RevellRider
    RevellRider Posts: 1,794
    To be honest, the way he came down, any bar would of been a write off. And I know that the bars he had on his Santa Cruz were some really old X-Lite bars. Not really worth judging the standard of current bars by
  • peter413
    peter413 Posts: 5,120
    Yeah I'm really not worried about them being carbon. Raceface is pretty good with its carbon stuff and the Sixc's are DH race bars. One video really isn't enough to go on, there will be plenty of alloy bars snapping in videos elsewhere I'm sure.

    The only reason I haven't had anything carbon before (apart from the carbon forks on the road bike) is only because of the cost, nothing to do with trust in the material or anything. I do honestly believe that carbon is stronger than aluminium if everything else is equal and it's done properly.
  • bennett_346
    bennett_346 Posts: 5,029
    How much do they weigh?
  • welshkev
    welshkev Posts: 9,690
    peter413 wrote:
    Yeah I'm really not worried about them being carbon. Raceface is pretty good with its carbon stuff and the Sixc's are DH race bars. One video really isn't enough to go on, there will be plenty of alloy bars snapping in videos elsewhere I'm sure.

    The only reason I haven't had anything carbon before (apart from the carbon forks on the road bike) is only because of the cost, nothing to do with trust in the material or anything. I do honestly believe that carbon is stronger than aluminium if everything else is equal and it's done properly.

    As I said, it's just me I think. That'd just be in the back of my mind. Plus I'm a fat git so that'd put more pressure in them:lol:
  • peter413
    peter413 Posts: 5,120
    How much do they weigh?

    Claimed 220g. I think there's a picture on Sicklines showing the actual weight at 234g.

    And Kev, pretty sure I probably weight more than you, if not then about the same :wink:
  • Kowalski675
    Kowalski675 Posts: 4,412
    Pair of these:

    51546_1_Zoom.jpg
  • kieron_67
    kieron_67 Posts: 161
    one of these for the c456

    10694_shimano_lx_m580_hollowtech_11_chainset_bb.jpg
  • pesky_jones
    pesky_jones Posts: 2,890
    2012 Dartmoor Hornet frame in graphite
    2012_zps23740cfb.jpg

    Blackspire stinger bottom roller.
  • fat_homer
    fat_homer Posts: 470
    A hope bottom bracket and some chainring bolts for the new build.

    hope_bb_Hope_BB_5718.jpeg
    kcnc-short-chainring-bolts-red-for-shimano-cranksets-and-similar-set-10.jpg

    Only need brakes, tyres and forks now. Unfortunately the forks I want aren't avaiable till July and tyre choice is a nightmare!
  • Anonymous
    Anonymous Posts: 79,667
    Ritchey TrueGrip Grid MTB Handlebar Grips

    seMZuzT.jpg
  • lawman
    lawman Posts: 6,868
    e13-lg1%2B-ls1--xcx-upper-slider-blk-a.jpg

    E-thirteen Xcx replacement upper slider in black, the backplate and guide are going on the HD but I'm not keen on the white on the 456, so ordered a black one to replace it. With my works components chainring I don't need the full on top and bottom guide.

    popup_image.php?pID=362

    Probably selling the LG1 as it won't fit the 456 either so that also needs a guide, so an XCR from superstar should do the trick, plus it's lime green :D
  • Bigger frame to replace the Rock Lobster as its just too small for me, knees are hitting my chin lol!

    Not sure what to do with the Lobster, its such a nice ride... shame :(
  • rgliniany
    rgliniany Posts: 753
    GT could buy it off you and store it with his multitude of frames..... or you could swap it for pics of his mum :wink:
    It's a boy , It's a boy , I Shouted Running Into The Street With Tears Running Down My Face.....

    That's The Last Time I Holiday In Thailand

    URL Pinkbike
  • tudj
    tudj Posts: 254
    2 x Shimano Stainless Steel Gear Inner Wire 1.2 x 2100 Single
    2 x KMC 10 Speed Chain Links Shim/Sram/KMC
    1 x BBB BDP-12 RollerBoys Ceramic Jockey Wheels Black
    1 x Polaris AM Descent Baggy MTB Shorts Steel/Grey/Cyan/Grap Medium
    1 x Altura Coolmax Cycling Socks - 3 Pack Black Large

    All boring :( mainly spares for my trip to Morocco
  • Anonymous
    Anonymous Posts: 79,667
    rgliniany wrote:
    GT could buy it off you and store it with his multitude of frames..... or you could swap it for pics of his mum :wink:

    multitude of scrappiness. :P
  • gt-arrowhead
    gt-arrowhead Posts: 2,507
    rgliniany wrote:
    GT could buy it off you and store it with his multitude of frames..... or you could swap it for pics of his mum :wink:

    multitude of scrappiness. :P

    Lol, yeah they are. Still waiting for the scrap man to come!

    I dont want anymore frames.

    Should be ordering a few bits today for the Chucker. Front wheel, cassette and chain...and ill try and get some more out of my mum :D
  • Anonymous
    Anonymous Posts: 79,667
    rgliniany wrote:
    GT could buy it off you and store it with his multitude of frames..... or you could swap it for pics of his mum :wink:

    multitude of scrappiness. :P

    Lol, yeah they are. Still waiting for the scrap man to come!

    I dont want anymore frames.

    Should be ordering a few bits today for the Chucker. Front wheel, cassette and chain...and ill try and get some more out of my mum :D

    don't try to hard you may break something :P
  • lawman
    lawman Posts: 6,868
    rgliniany wrote:
    GT could buy it off you and store it with his multitude of frames..... or you could swap it for pics of his mum :wink:

    multitude of scrappiness. :P

    Lol, yeah they are. Still waiting for the scrap man to come!

    I dont want anymore frames.

    Should be ordering a few bits today for the Chucker. Front wheel, cassette and chain...and ill try and get some more into my mum :D

    FTFY