Rear Derailleur Cable Tension
Having trouble indexing my gears. Everything was working perfect until I removed the rear wheel to repair a puncture. Since I put the wheel back on, certain gears would slip.
I have an 11-32, 11 speed cassette. The problem started when in the 28t, every few revolutions it kept catching on the 32t. I loosened the cable tension which solved this but created another problem in the high gears. When in the 11t, it won't shift down to the 12t smoothly. I fix this by adding tension, but again that recreates the intial problem when in the 28t. This is only adjusting the tension by 1 notch on the barrel adjuster as well. I've played around with the limit screws but cannot resolve it.
Checked derailer, it's straight as.
I have an 11-32, 11 speed cassette. The problem started when in the 28t, every few revolutions it kept catching on the 32t. I loosened the cable tension which solved this but created another problem in the high gears. When in the 11t, it won't shift down to the 12t smoothly. I fix this by adding tension, but again that recreates the intial problem when in the 28t. This is only adjusting the tension by 1 notch on the barrel adjuster as well. I've played around with the limit screws but cannot resolve it.
Checked derailer, it's straight as.
0
Posts