Forum home Mountain biking forum MTB beginners

Scrader and Presta valve compatibility question

HadaganHadagan Posts: 72
edited February 2010 in MTB beginners
Hi guys

Are Schrader and Presta valves interchangeable within the same innertube valve holder?

Also I have a Schrader valve removal tool ... will it work on a Presta valve?

If not how do you get a Presta valve out?

Many thanks in advance

Posts

  • ilovedirtilovedirt Posts: 5,798
    what do you mean by "valve holder" and what do you mean by getting a presta valve out?
    Production Privee Shan

    B'Twin Triban 5
  • The valve holder......the bit which the valve screws into which is atteched to the tube itself

    Silver in colour and the cap screws onto too

    Presta valve out ... like the way you can get a Schrader valve out to put Slime in for eg
  • no

    maybe but probably not

    untwist the part below the threaded thing for inflation; look for spanner flats to indicate a removable valve.
  • Thanks for that

    How about putting a Schrader valved tube into a tyre which currently has a Presta valved tube as a replacement......will the hole in the wheel be ok for both valve holders to fit through?

    Sorry if its a sill question for some but if I don't have the experience of it yet I wont know till I ask

    Cheers
  • Andy BAndy B Posts: 8,115
    if the rim is drilled for a schrader tube (wider valve than presta) and has a spacer you can remove it and fit a schrader tube, otherwise it's stick with presta, or drill a bigger hole to accept schrader tubes.
    2385861000_d125abe796_m.jpg
Sign In or Register to comment.