The new bike gadgetry thread
lost_in_thought
Posts: 10,563
For the discerning folk of the commuting forum I propose this new gadgetry:
http://www.flybikesbmx.com/en/news/post_1001
Sure, it's for BMX, but your thoughts? It's quite clever...
http://www.flybikesbmx.com/en/news/post_1001
Sure, it's for BMX, but your thoughts? It's quite clever...
0
Comments
-
Indeed, quite clever, but what is the performance level? I mean, is it better than a full tube? Can see benefit in races though.... could be good as a spare when on the road, but how much time will it really save."Encyclopaedia is a fetish for very small bicycles"0
-
So, these have caught my eye over the last couple of months. I don't need either but...
Cute power meter:
http://www.cyclingnews.com/features/on- ... 09-part-15
http://www.metrigear.com/products/
Garmin 500:
https://buy.garmin.com/shop/shop.do?cID=160&pID=36728
It's like the 705 (but no mapping), only much smaller. Think of the aero gains...0 -
lost_in_thought wrote:For the discerning folk of the commuting forum I propose this new gadgetry:
http://www.flybikesbmx.com/en/news/post_1001
Sure, it's for BMX, but your thoughts? It's quite clever...
I've used a similar tube on my bike, you used to be able to get them from Halfords, they were fine to use and really quick to change etc
Here they are
http://www.sjscycles.co.uk/product-SJSC ... -11126.htm0 -
JonGinge wrote:So, these have caught my eye over the last couple of months. I don't need either but...
Cute power meter:
http://www.cyclingnews.com/features/on- ... 09-part-15
http://www.metrigear.com/products/
Garmin 500:
https://buy.garmin.com/shop/shop.do?cID=160&pID=36728
It's like the 705 (but no mapping), only much smaller. Think of the aero gains...BMC TM01 - FCN 0
Look 695 (Geared) - FCN 1
Bowman Palace:R - FCN 1
Cannondale CAAD 9 - FCN 2
Premier (CX) - FCN 6
Premier (fixed/SS) - FCN30 -
Re Those tubes
I must be having an especially slow day as it took a while to figure out what the big deal was :oops:
Presumably the wheel still needs to come off to remove a traditional style tube from the wheel
Or have I got this totally wrong?“New York has the haircuts, London has the trousers, but Belfast has the reason!0 -
I've always wondered why there wasn't a tube with a break in it.
I've been half tempted to bodge one every now and then, just to see if it would work.
The whole linking thing is clever, though. However, I'm still not sure it's entirely necessary - I reckon pressure and expansion of a closed end tube would be sufficient to stop any nastiness of uneven inflation.0 -
WheezyMcChubby wrote:Presumably the wheel still needs to come off to remove a traditional style tube from the wheel
Or have I got this totally wrong?
If you were in a rush, you'd just cut it.0 -
if you don't link the ends, then the rotation of the tyre will cause the tube to process a lot.0
-
ride_whenever wrote:if you don't link the ends, then the rotation of the tyre will cause the tube to process a lot.
Do you mean precess?
I don't see why it would affect an unjoined tube any more than it would a joined tube.0 -
ride_whenever wrote:if you don't link the ends, then the rotation of the tyre will cause the tube to process a lot.
* not about the spelling0 -
JonGinge wrote:ride_whenever wrote:if you don't link the ends, then the rotation of the tyre will cause the tube to process a lot.
* not about the spelling
... but surely that backs it up, if anything.
It precesses with a flat tube because the pressure isn't keeping it in place. Despite the fact that it's a unbroken circular tube.
However, that example does bring up a good point. What happens if you get a sudden puncture with an unjoined tube? I'd suspect it would be all kinds of bad.0 -
Yes, sorry 2 hours sleep and been up since 6 :shock:
In a joined tube it does happen but the tension keeps it to a minimum, if you had a non fixed end (ie without the valve) it would rapidly work back round because of the tension in the rubber, and the rotational direction.0 -
mine had overlapping ends0
-
Halfords sacked them as they didn't prove popular. TBH this one seems as faffy as a couple of seconds with the spanner to pop the wheel off and put a standard tube on.0
-
shouldbeinbed wrote:Halfords sacked them as they didn't prove popular. TBH this one seems as faffy as a couple of seconds with the spanner to pop the wheel off and put a standard tube on.
My pondering was mainly based off of having played with hub gears.
Hopping the rear wheel off a hub geared bike to change the tube is completely the biggest pain in the posterior.0 -
Convenient, but tubeless is the way forward. Inner tubes are anachronistic pieces of junk that deserve extinction. IMHO...0
-
Aidy wrote:shouldbeinbed wrote:Halfords sacked them as they didn't prove popular. TBH this one seems as faffy as a couple of seconds with the spanner to pop the wheel off and put a standard tube on.
My pondering was mainly based off of having played with hub gears.
Hopping the rear wheel off a hub geared bike to change the tube is completely the biggest pain in the posterior.
I ride on an Alfine hub, changing the rear is a piece of P***
lever off 1 side of the tyre and pull the dead tube completely out
undo the nuts and lift the wheel just enough to slip the tube over the axle and past the dropouts same for slipping the new tube in.
put the wheel back in place and tighten the nuts again,
feed the new tube onto the rim, remount the 1 side of the tyre
inflate and away.
I've never had a pinch puncture after replacing like this and can change a tube and be on my way in a few minutes.
and all without the joys of getting oily from unhooking deraillures0 -
don_don wrote:Convenient, but tubeless is the way forward. Inner tubes are anachronistic pieces of junk that deserve extinction. IMHO...
+600000000000000000000000
it's awesome, going to convert my pompino when i get new wheels for it, and do my ss xc bike when the spokes arrive!0 -
-
FeynmanC wrote:Ok - dumb question. How do the tubeless work? What happens if you get a puncture?
for pinch flats aka snake bites there is no inner to rupture. for thorns etc they tend to have fluid like slime, seems to work better with mtbs than roadies.0