Idiot campag derailleur cable question
GeorgeShaw
Posts: 764
I'm about to change my rear derailleur cable (Centaur carbon 2009 ergos), and I've got a new campag cable set. The contents say 6 x casing caps, but I only have 4. the instructions say:
But there are no pre-mounted caps (the two missing ones presumably). And the cables that I've just removed from the ergos had no caps (that I noticed).
So is the documentation incorrect and no caps are required at the ergo end?
Front and rear derailleurs' casings have been pre-lubricated with a special grease, which has been inserted in the half of the casing where there are no "Campagnolo" logos and on which an end-cap has been pre-mounted. This is the end of the casing that must be inserted in the appropriate slot in the Ergopower control level body; if the casing needs to be shortened, the other end (with the double "Campagnolo" logo and without the end-cap) must be cut.
But there are no pre-mounted caps (the two missing ones presumably). And the cables that I've just removed from the ergos had no caps (that I noticed).
So is the documentation incorrect and no caps are required at the ergo end?
0
Comments
-
I believe it changed with the 2009 sets. AFAIK, and certainly when I assembled centaur 2009 setup I did it like this, that the cables at the ergo ends do not need caps.0
-
-
Thanks.0
-
redddraggon wrote:The 2009 cables are different to the previous generations. The new ergos won't work with end caps/ferrules anyway.
really?
thats a tad annoying"If I was a 38 year old man, I definitely wouldn't be riding a bright yellow bike with Hello Kitty disc wheels, put it that way. What we're witnessing here is the world's most high profile mid-life crisis" Afx237vi Mon Jul 20, 2009 2:43 pm0 -
The new Ergos take a smaller diameter outer - the old cables simple won't fit the new Ergos. New cables are a lot more flexible and lighter too.Make mine an Italian, with Campagnolo on the side..0