Cassettes

Frank50.mcmahon
Frank50.mcmahon Posts: 3
in Workshop
Hi can you use Ultegra cs-r8000 11speed To replace cs-6800 11speed without changing anything

Comments

  • joe_totale-2
    joe_totale-2 Posts: 1,333
    Yes, as long as it's the same ratio cassette. A larger or smaller ratio cassette may need a different chain length.
  • MattFalle
    MattFalle Posts: 11,644
    edited January 2021
    Yes. It's an 11 speed cassette.

    #yes
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • Frank50.mcmahon
    Frank50.mcmahon Posts: 3
    Thank joe does the letter t after the tooth number make a difference
  • MattFalle
    MattFalle Posts: 11,644
    No

    Its an Ultrgra 11 speed cassette being used to replace an Ultegra 11 speed cassette.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • joe_totale-2
    joe_totale-2 Posts: 1,333
    The letter t just means teeth
  • MattFalle
    MattFalle Posts: 11,644
    or just buy this 6800 and save yourself £20

    https://www.spacycles.co.uk/m8b0s150p4415/SHIMANO-11spd-Ultegra-CS-6800
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • Frank50.mcmahon
    Frank50.mcmahon Posts: 3
    Thanks guys fitted now
  • MattFalle
    MattFalle Posts: 11,644
    pictures of the bike to brighten up a dull Friday afternoon please.

    #photography
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • daniel_b
    daniel_b Posts: 11,909
    The only caveat being if it's an 11-34 you need spacers right?
    Felt F70 05 (Turbo)
    Marin Palisades Trail 91 and 06
    Scott CR1 SL 12
    Cannondale Synapse Adventure 15 & 16 Di2
    Scott Foil 18
  • david37
    david37 Posts: 1,313
    daniel_b said:

    The only caveat being if it's an 11-34 you need spacers right?

    and poss a new mech
  • MattFalle
    MattFalle Posts: 11,644
    david37 said:

    daniel_b said:

    The only caveat being if it's an 11-34 you need spacers right?

    and poss a new mech
    and chain

    #lacatena
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • elbowloh
    elbowloh Posts: 7,078
    david37 said:

    daniel_b said:

    The only caveat being if it's an 11-34 you need spacers right?

    and poss a new mech
    I think i had a 11-34 on a 6700 ultegra medium cage back in 2014 when i was in the Pyrenees. Think it was ok.
    Felt F1 2014
    Felt Z6 2012
    Red Arthur Caygill steel frame
    Tall....
    www.seewildlife.co.uk
  • dj58
    dj58 Posts: 2,223
    Don't you mean 11sp 6800 ultegra medium cage? There wasn't a 10sp 6700 medium cage RD, only RD-6700 SS 28T and the revised model RD-6700-A-SS 30T.

  • pippi_langsamer-2
    pippi_langsamer-2 Posts: 1,470
    Anyone know of any OEM parts for the 11sp sprocket spacers for Shimano? I think they're 2.8mm. Misplaced x2 somehow, and only ones I see online are "official", Shimano ones at £5 each ffs....
  • joe_totale-2
    joe_totale-2 Posts: 1,333
    £5 each?!? It's a little bit of plastic!
  • pippi_langsamer-2
    pippi_langsamer-2 Posts: 1,470
    joe_totale-2 said:

    £5 each?!? It's a little bit of plastic!

    Yup. SJS actually have some for £2.99 plus postage. Still painful....
  • MattFalle
    MattFalle Posts: 11,644
    that's ridiculous. utter rip off.

    go to your local lbs with a few tinnies in your hand and ask them if they have any in the bucket of old bits they have replaced on bikes - when MF was in the trade he would sling old cassettes, cables etc in a box and take them to the recycling once a month - if anyone popped in and wanted to mooch through it then for the price of a donation to charity take it all.
    .
    The camera down the willy isn't anything like as bad as it sounds.

Categories