11 speed flat bar shifters for Campagnolo

Hello to all! First off all i would like to thank you for the great help that you gave me over the years (in fact this forum has so much information, i didn't even had to post until now, even though I follow it from quite some time)
I'm trying to convert a road bike into a more city friendly one. I can't seem to find any solution regarding the shifters. I want to switch to a flat bar, and I got the first generation Campagnolo Super Record 11 speed groupset. From what I understand, since the 11 speed, Shifters from Campy work with shimano cog spacing and vice-versa. But I m not sure if Shimano Shifters would work properly with campy derailleurs.
Also, i'm not sure wich flat bar shifters from Shimano are for road bike (i assume the 11 speed mtb have different spacing)
Any help would be greatly appreciated.
I'm trying to convert a road bike into a more city friendly one. I can't seem to find any solution regarding the shifters. I want to switch to a flat bar, and I got the first generation Campagnolo Super Record 11 speed groupset. From what I understand, since the 11 speed, Shifters from Campy work with shimano cog spacing and vice-versa. But I m not sure if Shimano Shifters would work properly with campy derailleurs.
Also, i'm not sure wich flat bar shifters from Shimano are for road bike (i assume the 11 speed mtb have different spacing)
Any help would be greatly appreciated.
0
Posts
Campag made a 10 speed flat bar shifter set for the Veloce group set, but this seems to be discontinued and is really hard to find new. AFAIK they have not made anything for 11 speed Group sets. I know of no after market options either.
It seems if you really want to go flat bar you will have to change everything to Shimano or SRAM. As the others have said their flat bar shifters are not compatible with Campagnolo.
Good luck and I would be interested to know if you do find a solution what it is.
Bull horns with bar end shifters is possibly a workaround and use brake levers that mount on bull horns.
Sero/STi wont mount on bar ends or flat bars. The bull bars will have to have a 22.2mm diameter where you need to clamp for them to mount on them and even if they did it would look/feel all wrong.