K Edge Garmin Mount - Any UK Stock?

12345679»

Comments

  • Mark Elvin
    Mark Elvin Posts: 997
    BigMat wrote:
    Mark Elvin wrote:
    Had this printed by the guys at Racewear Direct from my CAD model, weighs about the same as the single sided Garmin mount that Racewear Direct make, just optimeised the use of material slighty. I also wanted a double sided clamp arrangement to satisfy the OCD side of me that wanted the symmetry & also adds an extra layer of confidence that it's not going to come adrift.

    There's probably still 15-25% weight saving to be had, but the geometry is spot on.

    20130531_184509_zps600a1cf2.jpg

    20130531_184443_zpsf7fc28e1.jpg

    20130531_184517_zps90865623.jpg

    I like it. I need something like that as I have carbon bars with a flat top and there isn't enough "round" profile next to the stem to fit an ahead mount. What I need is something like this with narrower protrusions either side of the stem plate. If I sent you dimensions, do you reckon you could check whether your design might work for my setup?

    There's a narrower one in the pipeline, but PM me your dimensions & we'll see if it fits.
    2012 Cannondale Synapse
  • Installer09
    Installer09 Posts: 21
    Has anyone tried one of these yet ? http://www.madison.co.uk/productinfo.as ... ef=KE500RD
  • redvee
    redvee Posts: 11,922
    Installer09 wrote:
    Has anyone tried one of these yet ? http://www.madison.co.uk/productinfo.as ... ef=KE500RD

    K-Edges have been mentioned elsewhere on the forum I believe.
    I've added a signature to prove it is still possible.
  • Installer09
    Installer09 Posts: 21
    This is the new pro version , with plastic insert for the mount and the adjustable length of the original k-edge removed . It looks much better to me as no chance of the Garmin being scratched by the mount . I did a search but couldnt find anything on it .

Categories