Forum home Mountain biking forum MTB workshop & tech

fitting an iscg 05 guide

ellsbells1973ellsbells1973 Posts: 537
edited August 2012 in MTB workshop & tech
just received a superstar plasma iscg 05 for fitting to my 456 evo, just a couple of points regarding the use of spacers,
the bb shell width is 73mm
now the chain device also came with a pile of washers, 3 for each bolt
now do these washers fit between the chain device and frame or is this supposed to fit flush with the iscg tabs on the frame?
also whats the score with the bb spacers, do i need to use any as there seems to be gaps if i dont or if i tighten the bb without the spacers the chainset seems to rub the chain device

Posts

  • nicklousenicklouse Posts: 81,520 Lives Here
    And the cranks are?

    But as it is not bb mount the chain line is not effected so you do nothing to the bb as you don't touch it.

    The spacers with the guide use them if you want or need to but you do not have to se them.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • they are deore cranks, i have sussed it now, there was a smaller bracket that i was able to remove from the chain guide, it miraculously fits now, i know i'm a bloke but sometimes some instructions would help when you by stuff :oops: ....... what a numpty
Sign In or Register to comment.