Hello, my recent purchase..

Woody80

Hope Evo Hub on Stans Flow rims which you can get in white as well

cooldad

While you're at it, send the V8's back and get these
http://www.ebay.co.uk/itm/Wellgo-MG1-MG ... 7dbd9578df

Latenight

I like the sound of this rim.

http://www.chainreactioncycles.com/Models.aspx?ModelID=55256

I know it's a freestyle rim.

Chunkers1980

It's a rim, you need a set of wheels. Qr rear, and 15 mm front, or one you can convert. If you do have a 15mm fork that is

Latenight

Yes it's a 15mm fork. I've bought the hope pro evo 2 15mm. Planning on buying 2 new rims, using my existing rear hub and new front hub.

Could I buy that ns rim but still suit the same ride as any other rim?

The ns Trailmaster is within my budget, not looking to spend any more.

Thanks

Chunkers1980

How are you going to build the rim into a wheel?

Woody80

Latenight wrote:

Yes it's a 15mm fork. I've bought the hope pro evo 2 15mm. Planning on buying 2 new rims, using my existing rear hub and new front hub.

Could I buy that ns rim but still suit the same ride as any other rim?

The ns Trailmaster is within my budget, not looking to spend any more.

Thanks

Unless you can build wheels I'd send the hub back and buy a complete front wheel based around a 15mm hub. Leave the rear as it is and just spec a white front rim to match if you want them to look similar. Otherwise your bargain will start to become expensive!
Look on CRC for front wheels and order complete.

Latenight

I was going to get someone to do it. Have a few contacts. Isit hard/costly for someone to put together a wheel?

Chunkers1980

It a lot costlier than buying a whole wheel, hence why no one has suggested doing it. Often in custom wheels the total is about the same as the sum of the parts, so you get the build for nothing.

Woody80

Not to mention the skill to build a decent wheel not just put it together. Save yourself the hassle and buy complete and get out and ride your bargain!!

Latenight

I didn't even know you could do custom setups on cr. ok I'm going to do that and get a complete wheel. With an extra rim for the back to complete after. Got a mate who knows a bike shop that might do it at no cost. So after all the fuss in gonna send back the hub.

So my choices are

Hope pro Evo 2 hub + ns trailmaster

Nuke proof hub+ ns trailmaster

Nuke proof hub + flow rims mentioned above




The nuke + ns is the most affordable. Will the ns rim be like a normal rim even though it's freestyle.

Thanks

supersonic

Look at Superstar builds too: Switch hub, Flow rims.

felix.london

Came to this a bit late so may have missed something.

Sorry to mention the obvious but you have a back wheel. So just build a front wheel using Superstar's Custom Wheel Generator;

http://superstar.tibolts.co.uk/product_info.php?cPath=52&products_id=315

felix.london

Ha! ...knew I'd probably missed something! You want white spokes - fair enough. You can use this link then to build a pair of wheels;

http://superstar.tibolts.co.uk/product_info.php?cPath=63&products_id=314

Latenight

I'll have a look at those, not heard of switch hubs before.

Thanks