The "I have just ordered..." thread

11415171920235

Comments

  • jairaj
    jairaj Posts: 3,009
    FSA Orbit MX in Gold:
    fsa-orbit-mx-hset-med.jpg

    Rock Shox Revelation Race U-turn:
    00005554-1.jpg

    Shimano SLX Chainset:
    product.image.+media+images+cycling+products+bikecomponents+FC+FC-M660_44T_600x450_v1_m56577569830648496_dot_jpg.bm.512.384.gif

    All being bolted onto the bike tomorrow, I can't wait :D
  • VWsurfbum
    VWsurfbum Posts: 7,881
    one of these
    not shimano!
    still waiting on forks and brakes from the states :cry:
    Kazza the Tranny
    Now for sale Fatty
  • Dunk_911
    Dunk_911 Posts: 239
    i will be sporting the, er, 'mans-man' look in the fine weather that is hopefully coming :D
  • Raymondavalon
    Raymondavalon Posts: 5,346
    FROO456SS-18-ORA_P2.jpg

    With headset and fitting service. 18 inches, sadly no pink ones available, but then again people may see me and think Andy got fat, ugly, slow and more strangely "went straight" :roll:
  • Richie63
    Richie63 Posts: 2,132
    FROO456SS-18-ORA_P2.jpg

    With headset and fitting service. 18 inches, sadly no pink ones available, but then again people may see me and think Andy got fat, ugly, slow and more strangely "went straight" :roll:

    Sweet
    I've just finished building one up but had to come back to work so can't get to ride it till next week.

    How are you intending to set it up -which size of fork 4 5 or 6
    I'm going to blow the bank on a new build ( within reason ) NOW DONE!!
    http://i570.photobucket.com/albums/ss14 ... 010362.jpg
  • Raymondavalon
    Raymondavalon Posts: 5,346
    I am still undecided on the fork right now. I do like long travel though
  • VWsurfbum
    VWsurfbum Posts: 7,881
    I'm loving my On-one :wink:
    Kazza the Tranny
    Now for sale Fatty
  • Richie63
    Richie63 Posts: 2,132
    I went for a van 36 from crc with a big reduction and for the small amount of time i rode it the bike felt quite balanced .It's in the my bike section under the heading " 456 morzine build"
    I'm going to blow the bank on a new build ( within reason ) NOW DONE!!
    http://i570.photobucket.com/albums/ss14 ... 010362.jpg
  • jay12
    jay12 Posts: 6,126
    oh yeah forgot about the tld gloves. nice choice
  • Gazlar
    Gazlar Posts: 8,083
    as mentioned in another thread........this with a big red number 19 on the back

    shirtie.jpg
    Mountain biking is like sex.......more fun when someone else is getting hurt
    Amy
    Farnsworth
    Zapp
  • D-Cyph3r
    D-Cyph3r Posts: 847
    Sony X-Bass MDR-XB700 headphones. Not sure if it's true but in a reader review someone mentioned they are "technically" the 2nd most powerful headphones in the world. :?

    sony-xb700-thumb-450x599.jpg
  • ramemtbers
    ramemtbers Posts: 1,562
    i have ordered bearings, many many bearings. well 12 actually but meh.
  • Chunkers1980
    Chunkers1980 Posts: 8,035
    Lovit that it's 'I have just ordered' as opposed to bought.... Does anyone buy anything that's not over £10 from your LBS?

    Online is just so much better... you can get what you want as opposed to what they stock...
  • ramemtbers
    ramemtbers Posts: 1,562
    It depends i get discount from my LBS..... Might be due to the fact i got my parents to buy there bikes there and we have probably all in all spent about 2500 quid there :? (2grand of which was mine :( ) ((i see an obcession))
  • lawman
    lawman Posts: 6,868
    Lovit that it's 'I have just ordered' as opposed to bought.... Does anyone buy anything that's not over £10 from your LBS?

    Online is just so much better... you can get what you want as opposed to what they stock...

    well i work in mine so i get everything from there :lol:
  • Chunkers1980
    Chunkers1980 Posts: 8,035
    still got the stock issue lawman unless they are very nice to you and you get to order what you want?
  • lawman
    lawman Posts: 6,868
    still got the stock issue lawman unless they are very nice to you and you get to order what you want?

    yer i say to my boss, i want x, he orders it and i pay out my wages and jobs a good un :D
  • VWsurfbum
    VWsurfbum Posts: 7,881
    if anyones interested in the weight difference between a shimano deore cassette and a Sram PG990
    old one 24d8c086.jpg
    new one
    b06f6ff1.jpg
    Kazza the Tranny
    Now for sale Fatty
  • El Capitano
    El Capitano Posts: 6,400
    A pair of these:

    441-2.jpg

    90mm for Gripshift. They're for the XTC. Which is now starting to cost me money. :( £11.99 for these and the £5.99 for the seatpost shim. Damm, this is becoming a very expensive bike... :shock:
  • Gazlar
    Gazlar Posts: 8,083
    more grip clamps, dont order custom engraved ones at 2 am while drunk........I've waited two weeks for these, then when they arrive theres just one clamp of each esign I ordered, read the small print kids
    Mountain biking is like sex.......more fun when someone else is getting hurt
    Amy
    Farnsworth
    Zapp
  • bartimaeus
    bartimaeus Posts: 1,812
    On of these, in black...
    hope-seatclamps-med.jpg
    Vitus Sentier VR+ (2018) GT Grade AL 105 (2016)
    Giant Anthem X4 (2010) GT Avalanche 1.0 (2010)
    Kingley Vale and QECP Trail Collective - QECP Trail Building
  • Beardface
    Beardface Posts: 5,495
    Ordered earlier an On One tapered (reducer) headset, plus fitting, for the carbon 456.

    Just recieved an email to say the items will be shipped asap.. so, hopefully the build will begin soon! :D

    Running low on funds this month though (after frame etc..), so just ordered as a temporary fix:

    Red superstar seatclamp, 34.9mm (£5.99 - bargainous, just wish they did QR ones!)
    Cheapo generic alloy seatpost, 31.6mm (tenner new off fleabay)

    Both of these will get changed with next months pay though, to a red QR seatclamp (Hope/KCNC) and a carbon post of some sort..

    Keep your eyes out for the WIP thread soon to appear! :D:D
    *Although I'm sure there will be some much nicer builds than mine!
  • toby_winkler
    toby_winkler Posts: 1,298
    Shimano M076 SPD shoes:

    31536.jpg

    Shimano M520 Clipless SPS Pedals:

    3759-1.jpg

    Nothing to amazing, first attempt at riding clipped in so we will have to see how things go!
  • The Big Cheese
    The Big Cheese Posts: 8,650
    Topeak Mountain Morph pump - not the mini 'caz I am a geezer!!! ;) I hope (after a series of 'not-so-good' pumps that this lives up to the hype!!!)

    2908.jpg

    Blade Runner - The Final Cut (2-disc Edition)
    3475206x.jpg
  • thekickingmule
    thekickingmule Posts: 7,957
    The Big Cheese I've got that pump, I think you'll be very pleased with it! Pumps a tyre up to a good high pressure in a minute or so with no real effort going into it. Good choice!
    It takes as much courage to have tried and failed as it does to have tried and succeeded.
    Join us on UK-MTB we won't bite, but bring cake!
    Blender Cube AMS Pro
  • Anonymous
    Anonymous Posts: 79,666
    Topeak Mountain Morph pump - not the mini 'caz I am a geezer!!! ;) I hope (after a series of 'not-so-good' pumps that this lives up to the hype!!!)

    2908.jpg

    do want. where from and how much please? will it fit in a normally bikikng backpack?
  • The Big Cheese
    The Big Cheese Posts: 8,650
    Topeak Mountain Morph pump - not the mini 'caz I am a geezer!!! ;) I hope (after a series of 'not-so-good' pumps that this lives up to the hype!!!)

    2908.jpg

    do want. where from and how much please? will it fit in a normally bikikng backpack?

    £19.99 (it's a mini-track pump)... theres a code someone quoted in 'General' that takes the price down to £17.99 from CRC.....

    ALways get AMAZING reviews!!!

    And yes, will fit in normal dfaysack/riding pack... exact specs are on the Topeak webby!
  • Raymondavalon
    Raymondavalon Posts: 5,346
    For the 456 build...

    00005554-1.jpg
    # Travel 120-150mm
    # Weight 1620g (3.57 lbs) <-- I feel like El Capitano!
    # Damping Motion Control
    # Available Springs Air U-Turn
    # Adjustments External Rebound, Low Speed Compression, External Floodgate And Lockout, *Spring Via Air Pressure
    # Steerer Options Aluminum, 1 1/8"
    # Crown Forged, Hollow 6061 T-6 Aluminum
    # Upper Tubes 32mm, 7000 Series Straight Wall Aluminum, Low Friction Anodized
    # Lowers , Post Mount Disc Brake - Optional 20mm Maxle Lite (included)
    # Maximum Rotor Size 210mm
    # Remotes Poploc
    # Note, slightly different to picture in that these forks have the remote poploc lockock (not crown lockout) Standard 1 1/8" steerer
  • cat_with_no_tail
    cat_with_no_tail Posts: 12,980
    Nice, good choice. If I was ever to swap my Pikes, these would be the ones I swapped for.

    Awesome price too!