chain device
abul
Posts: 347
im looking at going single ring up front and getting a chain device... im not sure if my bike would take a chain device though because i dont know how they fit
will be on the scott in my sig [;)]
cheers
<h6><font color="red"><i>Az</i></font id="red">
<center>
High Octane
</center>
<div align="right">Bebo</div id="right">
<center><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by carey8</i>
Slip a finger in her mouth. Grab her Dangly thing. Rip it out and say "listen here bi<u></u>tch, is this still cute to you?"
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"></center></h6>
will be on the scott in my sig [;)]
cheers
<h6><font color="red"><i>Az</i></font id="red">
<center>
High Octane
</center>
<div align="right">Bebo</div id="right">
<center><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by carey8</i>
Slip a finger in her mouth. Grab her Dangly thing. Rip it out and say "listen here bi<u></u>tch, is this still cute to you?"
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"></center></h6>
i used to have a sig [;)]
0
Comments
-
MRP system 2 with some mods. http://www.pinkbike.com/photo/396900/
nick
<hr noshade size="1">
My Pictures.
Pinkbike Album.
<center><font size="1">
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
<font color="brown"> Sheldon Brown</font id="brown"> <font color="blue">Park Tools!</font id="blue"> <font color="black">Spoke Calculator</font id="black">
older than an old thing that is very old</font id="size1"></center>
[?] Mail me!"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
If it doesn't have iscg holes then you'll need an adaptor, these can be got from crc and go between the bb and the frame. Then you should be able to fit just about any chain device.
My Scott
My Single Speed
Always remember to pick your Uni according to the local trails or you'll be stuck with nowhere to ride for three years!0 -
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by ride_whenever</i>
If it doesn't have iscg holes then you'll need an adaptor, these can be got from crc and go between the bb and the frame. Then you should be able to fit just about any chain device.
My Scott
My Single Speed
Always remember to pick your Uni according to the local trails or you'll be stuck with nowhere to ride for three years!
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
says a person who has never tried fitting a chain device to one of these frames.
nick
<hr noshade size="1">
My Pictures.
Pinkbike Album.
<center><font size="1">
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
<font color="brown"> Sheldon Brown</font id="brown"> <font color="blue">Park Tools!</font id="blue"> <font color="black">Spoke Calculator</font id="black">
older than an old thing that is very old</font id="size1"></center>
[?] Mail me!"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
so its possible then! ill jsut take it to the lbs to do its b'coz i know its going to be as auquard as building it.
<h6><font color="red"><i>Az</i></font id="red">
<center>
High Octane
</center>
<div align="right">Bebo</div id="right">
<center><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by carey8</i>
Slip a finger in her mouth. Grab her Dangly thing. Rip it out and say "listen here bi<u></u>tch, is this still cute to you?"
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"></center></h6>i used to have a sig [;)]0
