Looking some advise

bikeit65
bikeit65 Posts: 982
edited March 2016 in Workshop
Looking some advise, bought a Planet X RT58 bike just over two years ago, left in into a local bike shop today to get the rear gear cable replaced, but the mechanic cannot get the cable back through the frame as there is something obstructing it, so i rang Planet X to ask for some guidance and spoke to their customer service dept, they tell me that because the frame is outside the two year warranty period there is nothing they can do, but if you would like a new frame it will cost you £799, great, so i just Googled my bike and model number and there are other people in the same boat that im currently in, so i ring Planet X again and explain this to them only to be told sorry this is the first time we have had any issues with any RT58 carbon frames. so what should i do now?
https://www.instagram.com/seanmcgrathphotography/
Planet X RT58
Cannondale CAAD 10 2012.
Pain.. Is weakness leaving the body.

HATING LIFE-CYCLES FROM 2011

Comments

  • seanorawe
    seanorawe Posts: 950
    ITs a common theme with Planet X customer service, keep ringing them until you get somoene more helpful. Tell him you just want advice and you are happy to pay for your local mechanic if its something simple they are aware of.
    Cube Attain SL Disc
    Giant CRS 2.0
  • bikeit65
    bikeit65 Posts: 982
    Local bike mechanic just told me he has never seen this problem before, he works with all different brands of bikes and has never had this problem before, just rang Planet x again still no further on, sorry there is nothing we can do but we can sell you a new frame for £799 yea great.
    https://www.instagram.com/seanmcgrathphotography/
    Planet X RT58
    Cannondale CAAD 10 2012.
    Pain.. Is weakness leaving the body.

    HATING LIFE-CYCLES FROM 2011
  • ugo.santalucia
    ugo.santalucia Posts: 28,273
    Sounds like you need a new set of drill bits... :-)
    left the forum March 2023
  • bikeit65
    bikeit65 Posts: 982
    Hi ugo long time hearing from you, hope all is well, think i need a new hacksaw blade, a big one.
    https://www.instagram.com/seanmcgrathphotography/
    Planet X RT58
    Cannondale CAAD 10 2012.
    Pain.. Is weakness leaving the body.

    HATING LIFE-CYCLES FROM 2011
  • FishFish
    FishFish Posts: 2,152
    Well why are you contacting planet x. The lbs should either carry out the work or return the bike to you in the same state that you left it I would have thought.
    ...take your pickelf on your holibobs.... :D

    jeez :roll:
  • redvision
    redvision Posts: 2,958
    FishFish wrote:
    Well why are you contacting planet x. The lbs should either carry out the work or return the bike to you in the same state that you left it I would have thought.

    Sounds to me like he is ringing planet x asking for advice /solution, as the lbs is a bit stumped.
    Seems perfectly logical to me to ring the manufacturer asking for a solution.

    OP sounds a right PITA.
    Is there another lbs you can try?
  • bikeit65
    bikeit65 Posts: 982
    As redvision said, i read on here and another forum that other RT58 owners had issues with rear cables, no solution they had to buy new frames. i will try another bike shop Tuesday as all shops here are closed until then due to the Easter holidays.
    https://www.instagram.com/seanmcgrathphotography/
    Planet X RT58
    Cannondale CAAD 10 2012.
    Pain.. Is weakness leaving the body.

    HATING LIFE-CYCLES FROM 2011
  • bikeit65
    bikeit65 Posts: 982
    Spent the last hour and a half fiddling with the bike, so i can get a cable to feed inside the frame from the front entry point about 18ins and can also get another cable to feed from the back exit point of the frame for about 22ins but they are not meeting inside the frame,
    https://www.instagram.com/seanmcgrathphotography/
    Planet X RT58
    Cannondale CAAD 10 2012.
    Pain.. Is weakness leaving the body.

    HATING LIFE-CYCLES FROM 2011
  • dj58
    dj58 Posts: 2,219
    Does removing the BB throw any light on what may be causing the obstruction?
  • bikeit65
    bikeit65 Posts: 982
    Had the crankset off earlier its a totally sealed unit, no holes in there for cables
    https://www.instagram.com/seanmcgrathphotography/
    Planet X RT58
    Cannondale CAAD 10 2012.
    Pain.. Is weakness leaving the body.

    HATING LIFE-CYCLES FROM 2011
  • agent nomad
    agent nomad Posts: 93
    If you get really desperate try and find an engineering inspection company that has a borescope and ask them to have a look down the tubes.

    You can also try getting a TIG filler welding rod in 1.6mm dia to thread into the frame if you get this through the frame and passed the obstruction you can then thread a thin walled small dia tube over the wire rod pull this through the frame now thread the new gear cable through the tube then remove the tube

    if you are local wish to DN350SN I will have a go for you if you drop it off with me. I move to Manchester in a months time so that may be better for you.
  • ugo.santalucia
    ugo.santalucia Posts: 28,273
    There's probably some loose fibre inside the tube that obstruct the channel... it happens in some Chinese rims too. In the latter case I have always sorted it with a drill (being careful). If it's deep down the tube, then try using some steel wire of some description to dislodge the bundle.

    It happens in the best frames too, it's part of the in mould process, wouldn't happen in the case of filament woven tubes, but nobody use them anymore
    left the forum March 2023

Categories