Claud Butler Restoration
waveydavey00
Posts: 3
Hi All, thanks for the add - I am looking for some advice re. transfers - they are a good looking replacement, but they are on laser cut vinyl and need to be lacquered over. Is there a particular acrylic lacquer others have used on laser cut vinyl transfers ? Any help gratefully received. Frame is powder coated so thinking put a good coat of lacquer over them and frame.
Have you any idea of price for lacquer ,Steve
Have you any idea of price for lacquer ,Steve
0
Comments
-
Have a look at this: http://www.amazon.co.uk/dp/B007TI0EYS/r ... 0K9PM6ZN05
Read the review comments too.Common sense in an uncommon degree is what the world calls wisdom0 -
NervexProf wrote:Have a look at this: http://www.amazon.co.uk/dp/B007TI0EYS/r ... 0K9PM6ZN05
Read the review comments too.
Thank you for advice - I managed a can from local Car shop and did a few tests on an old can with scrap test pieces - this worked well. How do I post a photo to show you?0 -
Test first as sometimes it is difficult to get clear coat to adhere to powder coat, no problem with vinyl printed decals and clear coat, best if you use a really thin spray on the first coat and 15 minutes later spray clear coat as normal, this first coat seals the printed item.
You can get powder coated clear powder over frame and decals.
Tutorial on posting photo's
viewtopic.php?t=12572310my isetta is a 300cc bike0
