Play in DMR Vault

frankspencer1979
frankspencer1979 Posts: 525
edited September 2013 in MTB workshop & tech
There's play in me drive side Vault and it's really noticeable when pedalling (there's a small amount in t'other side but this is not noticeable.) I've removed the pedal body, cleaned up the axle, re-greased and made sure the o-rings are in position, but it's made no difference. The bearings feel smooth, the pedals spin smoothly and quietly.

The play is at the crank end, at the o-rings, so it seems to me they could be the problem? Worn or something? Service kits are 20-25 quid which seems excessive, although I've found a German site doing them for 13 euro, still a bit much. Would any cheap o-ring of the right diameter do?

Comments

  • nicklouse
    nicklouse Posts: 50,675
    more likely to be the bush in the body.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • frankspencer1979
    frankspencer1979 Posts: 525
    Am I right in saying there's an o-ring on the axle which seals up against the bush in the body then? Is this replaceable with an alternative or does it have to be the DMR specific product?

Categories