2 hangers in 2 rides...

2»

Comments

  • concorde
    concorde Posts: 1,008
    It was touching the second from biggest cog, wouldn't go into the biggest. Then I adjusted the b screw so it moved away from the cog and then it shifted into the biggest cog.
  • cooldad
    cooldad Posts: 32,599
    If it went from OK to touching that cog in one ride something's either broken or went very wrong.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • concorde
    concorde Posts: 1,008
    cooldad wrote:
    If it went from OK to touching that cog in one ride something's either broken or went very wrong.

    Yeah that's what I thought, it's a strange thing to happen! Don't know what it could be though...
  • Maro
    Maro Posts: 226
    Sounds like maybe something is working loose or is slipping while you ride.
    Bird Aeris. DMR Trailstar. Spesh Rockhopper pub bike.
  • concorde
    concorde Posts: 1,008
    Maro wrote:
    Sounds like maybe something is working loose or is slipping while you ride.

    Think you may be right, on closer inspection of taking the mech off. The bolt that screws into the hanger had come loose, undone a few threads. Didn't look like it had ripped out, looked like it had worked itself loose. I done it up tight as far as I remember. Will be checking it every couple of miles in the next few rides, see if I can work it out.

Categories