clarks skeletal brakes rubbing!
RJHazell
Posts: 25
hi all,
have been struggling with Clark's skeletal brake system. cannot get them to stop rubbing on the rotors. have tried the 2minute self-centering trick loads of times to no avail. have also tried different amounts of spacers between the caliper and the mount, also no good.... what could it be? rotors do not seem bent by eye, lay flat on a surface and do not seem to be out of ovality either,
any suggestions welcome!
p.s. I know they're quite a cheap braking system but I'm sure they should be OK straight out of the box! my juicy 3s on the mountain bike were excellent from the start!
rob.
have been struggling with Clark's skeletal brake system. cannot get them to stop rubbing on the rotors. have tried the 2minute self-centering trick loads of times to no avail. have also tried different amounts of spacers between the caliper and the mount, also no good.... what could it be? rotors do not seem bent by eye, lay flat on a surface and do not seem to be out of ovality either,
any suggestions welcome!
p.s. I know they're quite a cheap braking system but I'm sure they should be OK straight out of the box! my juicy 3s on the mountain bike were excellent from the start!
rob.
0
Comments
-
Push the pistons back in and set up again. Then leave to bed in.0
-
OK, will try that tonight! would you say the best way is to insert the 6mm plastic shim that came with them?0
