Crud Roadracer mkII tips?
Bascially I've fitted these guards last night, the front is fine, no issues there.
However the frame I have (BMC Streetfire) has so little clearance between the rear stay and the tyre that I had to chop the front off, and that means I can't use the extra peice that goes down by the front mech, but it still rubs!
Is there anything else I can do? I'm using tiny cable ties and they are very tight yet its still rubbing my tyres
Any tips would be really apreciated.
However the frame I have (BMC Streetfire) has so little clearance between the rear stay and the tyre that I had to chop the front off, and that means I can't use the extra peice that goes down by the front mech, but it still rubs!
Is there anything else I can do? I'm using tiny cable ties and they are very tight yet its still rubbing my tyres
Any tips would be really apreciated.
Blog on my first and now second season of proper riding/racing - www.firstseasonracing.com
0
Comments
-
I think it's possible to use a heat gun/hair dryer to "slightly" remould the plastic. I never tried it on mine, but agree it's a tight fit on my CAAD9.
I don't think I'd be able to use 25mm on my bike, which is a pity because I prefer them in winter
CAAD9
Kona Jake the Snake
Merlin Malt 40
