grumbly bottom bracket (not in bike)
allthegearnoidea
Posts: 4,077
have an isis bottom bracket int he shed that was about toi be put inot some use but i'm a little concerned about the noise its making!!
hwen you hold it in your hand and spin the shaft you can hear it! its actually quite noisy! now my spare octalink one is quiet when you rotate the shaft,
i've sprayed lube around the ends as best i can and put some grease around the ends etc, but its still considerably noisy!
is it as i am thinking, shot??
ta in advance!
hwen you hold it in your hand and spin the shaft you can hear it! its actually quite noisy! now my spare octalink one is quiet when you rotate the shaft,
i've sprayed lube around the ends as best i can and put some grease around the ends etc, but its still considerably noisy!
is it as i am thinking, shot??
ta in advance!
Timmo.
After all, I am Cornish!
http://cornwallmtb.kk5.org/
Cotic Soul, The bike of Legends!
Yes, I Am a bike tart!
http://www.bikeradar.com/forums/viewtop ... 1#16297481
After all, I am Cornish!
http://cornwallmtb.kk5.org/
Cotic Soul, The bike of Legends!
Yes, I Am a bike tart!http://www.bikeradar.com/forums/viewtop ... 1#16297481
0
Comments
-
i dont know of any spray lube out there suitable for bearings. Bet you have washed all the grease out.
And some bearings can feel a bit rough before use.
Not happy dont fit it."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
hmmn, well was quite stiff as such before i lube'd it but the noise hasnt changed, so hadthought it was possibly a bit knackered!
umming and ahing over fitting as will be going in the carbon frame and that'll resonate like mad!
hmmn, time ot convince the wife for More bike parts haha!
thanks nick!Timmo.
After all, I am Cornish!
http://cornwallmtb.kk5.org/
Cotic Soul, The bike of Legends! Yes, I Am a bike tart!
http://www.bikeradar.com/forums/viewtop ... 1#162974810 -
just a quickie,
e-type bottom bracket, is it essentially the same with just a longer drive side cup?? as in a spacer required to take up the extra space if not using an e-type hanger???Timmo.
After all, I am Cornish!
http://cornwallmtb.kk5.org/
Cotic Soul, The bike of Legends! Yes, I Am a bike tart!
http://www.bikeradar.com/forums/viewtop ... 1#162974810 -
yes spacer needed or the cranks will be too close to the frame."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
thanks nick, your a star matey!
(dont suppose you happen to know the thickness of said spacer by any chance?? - keeping the options open a bit! ) Timmo.
After all, I am Cornish!
http://cornwallmtb.kk5.org/
Cotic Soul, The bike of Legends! Yes, I Am a bike tart!
http://www.bikeradar.com/forums/viewtop ... 1#162974810 -
about 2.5mm "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Thanks matey! your a star!Timmo.
After all, I am Cornish!
http://cornwallmtb.kk5.org/
Cotic Soul, The bike of Legends! Yes, I Am a bike tart!
http://www.bikeradar.com/forums/viewtop ... 1#162974810
