Replacement I-drive main pivot bearings

carlos-g

Went out for a 15 mile ride in the ruckus last night and my rear end felt a bit loose(be nice[;)]),checked it out when we got home and evrything was tight boltwise but there was definatly movement on the main pivot so my gues is the needle bearing has had it.

I know I can get a new set for œ30+ p+p from BETD , can anybody else reccomend anywhere else , there's a bearing co near to where I work that i could maybe try if I drift out the old set for them to compare.

GT Ruckus I-Drive
GT I-Drive comp
M-TRAX Road Bike

Unknown

Your link wont work! Is it the older I drive system? BETD usually the best bet.

<center><font size="1"><font color="red">GT Zaskar LE</font id="red">
<font color="red">GT Ruckus</font id="red">
<font color="red">Me!</font id="red">
<font color="purple">MYSPACE</font id="purple"><hr noshade size="1"><font color="red">Park Tools - help and instructions for all general bike fixes</font id="red">
<font color="red">Sheldon Brown - info about anything and everything</font id="red"></font id="size1"></center>

carlos-g

Yes it's the older system , think I'll get the BETD ones ordered on payday all the stuff I've had from them in the past has been good.

edit:the link should work now it was linking to the old pinkbike system.

GT Ruckus I-Drive
GT I-Drive comp
M-TRAX Road Bike

Jinja Ninja

sorry, bit of topic but what are those forks on the Comp and how long. Only ask as I've got the comp and feel that the handle bars/front end are a bit low.

<hr noshade size="1">
Theres only one return, and it ain't of the "king" Its of the Jedi

"Frankie's little Bro"[:o]

carlos-g

Rockshox psylo race set at 125mm , MBUK used to say they liked the older I-drives set up with 100mm travel but when you weigh 15 stone like me then the extra inch is useful[:D]

GT Ruckus I-Drive
GT I-Drive comp
M-TRAX Road Bike

Jinja Ninja

I'm runnin 120's at the moment, tempted to go a little higer! mabey 140 ish

<hr noshade size="1">
Theres only one return, and it ain't of the "king" Its of the Jedi

"Frankie's little Bro"[:o]

soulsaverwmb

Maybe http://www.enduroforkseals.com/index.html
I got new bearings for my Reign from these guys.

<hr noshade size="1"><b><font size="1"><u><font color="black">My Giant Reign</b></font id="size1"></u></font id="black"><font size="1"> <b><i><font color="black"> :Upcoming upgrades, money permitting: </b></font id="black">Pike forks. Fox RP23 Shock. Hope pro2 hubs.Oh and maybe some flying snake cables given that everyone keeps on about them. </i><b></font id="size1"><font color="black"><i><font size="1">My Dream replacement</font id="size1"></i></b></font id="black">

<b><u><font color="black"><font size="1"> My Marin Palisades Trail</b></u></font id="black"></font id="size1"><font size="1"> <b><i><font color="black"> :Upcoming upgrades, money permitting: </b></font id="black"> XT Crankset(Got it, just need to face BB beofre I can fit).Do away with R/R rear mech and change front and back mechs to 07 XTR. Sram PC991 chain and PG990 Cassette. Hope mini brakes. SDG carbon I-Beam seat post and saddle.Carbon Bars. </i></font id="size1"><font color="black"><i><b><font size="1">My Dream replacement</b></i></font id="size1"></font id="black">
<hr noshade size="1"><font color="black"><center><font size="1">My new flickr page. Its going to take some time to get all my photos uploaded</font id="size1"></center></font id="black">

Unknown

When I tested the older Idrives (circa 2002) I found that 125mm worked well, with 30mm sag. Was also a psylo, which is quite tall axle to crown.

<center><font size="1"><font color="red">GT Zaskar LE</font id="red">
<font color="red">GT Ruckus</font id="red">
<font color="red">Me!</font id="red">
<font color="purple">MYSPACE</font id="purple"><hr noshade size="1"><font color="red">Park Tools - help and instructions for all general bike fixes</font id="red">
<font color="red">Sheldon Brown - info about anything and everything</font id="red"></font id="size1"></center>