Confused with my fork...?
Hi all,
Sorry for another newbie question [:I]
Confused about my fork; '05 Marzocchi Z1 FR2.
If you could look at this screenshot from the manual;
http://s41.photobucket.com/albums/e273/ ... Manual.jpg
It has a valve for air on each leg, and both seem to adjust the preload; whats the difference? Which do I mess with?
Oh, anyone know if the 06 valve adapter will be OK on my fork (http://www.chainreactioncycles.com/Mode ... delID=2198)?
Ta, Duane [:)]
<hr noshade size="1"><h4><b> <center> GT Ruckus</center><center>"From The Top To The Bottom"</center><center>(Im in the green T-Shirt)</center><center>www.NorthWalesRiders.co.uk
Please check it out (and register)!</center></b></h4>
Sorry for another newbie question [:I]
Confused about my fork; '05 Marzocchi Z1 FR2.
If you could look at this screenshot from the manual;
http://s41.photobucket.com/albums/e273/ ... Manual.jpg
It has a valve for air on each leg, and both seem to adjust the preload; whats the difference? Which do I mess with?
Oh, anyone know if the 06 valve adapter will be OK on my fork (http://www.chainreactioncycles.com/Mode ... delID=2198)?
Ta, Duane [:)]
<hr noshade size="1"><h4><b> <center> GT Ruckus</center><center>"From The Top To The Bottom"</center><center>(Im in the green T-Shirt)</center><center>www.NorthWalesRiders.co.uk
Please check it out (and register)!</center></b></h4>
0
Comments
-
Zocchis can be a faff to set up, and the manuals are rubbish.
There should be a table giving air pressure for each leg, usually you just put the same amount in each leg to start with, then you can tune them by working out which leg does what
I don't think the HSVC is affected by air pressure, so I'd run them the same and see how you get on
<font size="1"><hr noshade size="1">
<font color="red">My Photos</font id="red"> <font color="blue">My Inbred</font id="blue"> <font color="teal"></font id="teal">My Carrera Gryphon <font color="black">My Single Speed</font id="black"> <font color="green">TyMBR</font id="green">
</font id="size1">0 -
the adaptor will be fine for one leg and just dont use it for the other.
both valves are just for air preload as there are springs in both legs.
max air 15psi witch will leave you with a very stif fork.
nick
<hr noshade size="1">
My Pictures.
Pinkbike Album.
<center><font size="1">
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
<font color="brown"> Sheldon Brown</font id="brown"> <font color="blue">Park Tools!</font id="blue"> <font color="black">Spoke Calculator</font id="black">
older than an old thing that is very old</font id="size1"></center>
[?] Mail me!0
