Mono M4 Fork Mount Adaptors

Unknown

I've just bought a Rockshox Revelation Air U-Turn 2007 fork and am considering fitting Mono M4 brake.

My question is, is an adaptor needed to fit it? Are there different sized IS mounts (CRC require a choice of mount when buying and have).

Any help would be most appreciated.

Chris

Andy B

IS is International Standard, there's a clue in the name!

The only other mount currently in use is PM (Post Mount) which is used my Manitou & some Marzocchi forks IIRC

I think that this (Hope Mount Adaptor Front Post to IS 183mm) is the one for your forks with a 183mm rotor.

<hr noshade size="1"><font size="1"><center><font color="green"><i>Official Forum Potty Mouth 2007</i></font id="green"></center></font id="size1"><font size="1"><hr noshade size="1"><center><font color="violet">My Flickr Album, With <b>new</b> updated bike pics</font id="violet">
<font color="green">Me & My Bikes</font id="green"> <font color="orange">Orange Bikes</font id="orange"> <font color="blue">Howies© </font id="blue"><font color="black">moredirt photo gallery</font id="black">
<font color="purple">'05 C2C Pic's, </font id="purple"><font color="red"> Red Bull Soap Box Race </font id="red"><font color="black">&</font id="black"><font color="brown"> Snowboarding Pics</font id="brown"></center></font id="size1">

Unknown

So when boxxer type is mentioned, that is post mount?

I understood the idea of International standard until I looked at the CRC site <<http://www.chainreactioncycles.com/Kits.aspx?ModelID=15617&PartnerID=371>&gt;

Makes more sense after reading your post.

Cheers for your help.

Chris

Andy B

Boxxer mount is specifically for a Boxxer fork

<hr noshade size="1"><font size="1"><center><font color="green"><i>Official Forum Potty Mouth 2007</i></font id="green"></center></font id="size1"><font size="1"><hr noshade size="1"><center><font color="violet">My Flickr Album, With <b>new</b> updated bike pics</font id="violet">
<font color="green">Me & My Bikes</font id="green"> <font color="orange">Orange Bikes</font id="orange"> <font color="blue">Howies© </font id="blue"><font color="black">moredirt photo gallery</font id="black">
<font color="purple">'05 C2C Pic's, </font id="purple"><font color="red"> Red Bull Soap Box Race </font id="red"><font color="black">&</font id="black"><font color="brown"> Snowboarding Pics</font id="brown"></center></font id="size1">

Unknown

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Forrestb1977</i>

So when boxxer type is mentioned, that is post mount?

I understood the idea of International standard until I looked at the CRC site <<http://www.chainreactioncycles.com/Kits.aspx?ModelID=15617&PartnerID=371>&gt;

Makes more sense after reading your post.

Cheers for your help.

Chris


<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> No it is to fit a boxxer frok.

nick
<hr noshade size="1">
My Pictures.
Pinkbike Album.
<center><font size="1">
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."

<font color="brown"> Sheldon Brown</font id="brown"> <font color="blue">Park Tools!</font id="blue"> <font color="black">Spoke Calculator</font id="black">
older than an old thing that is very old</font id="size1"></center>
[?] Mail me!

Richard Hwmb

You need the IS mount. I have the same forks and brakes.

My Yeti 575

http://www.pinkbike.com/photo/?op=list& ... rid=152581

Unknown

Ta

Chris

Unknown

this might help you understand a bit more http://www.mbuk.com/forum/topic.asp?TOPIC_ID=190919

nick
<hr noshade size="1">
My Pictures.
Pinkbike Album.
<center><font size="1">
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."

<font color="brown"> Sheldon Brown</font id="brown"> <font color="blue">Park Tools!</font id="blue"> <font color="black">Spoke Calculator</font id="black">
older than an old thing that is very old</font id="size1"></center>
[?] Mail me!

Richard Hwmb

You need the IS mount. I have the same forks and brakes.

My Yeti 575

http://www.pinkbike.com/photo/?op=list& ... rid=152581

Unknown

Wow, so many quick responses!

Thanks for the forum link Nicklaus. V helpful.

Chris

Mad Splasherwmb

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Andy_B</i>

IS is International Standard, there's a clue in the name!
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

This is a bit glib given all the other mounts available and the fact that even the IS comes in two types (20mm and QR)!

<font size="1">George
<hr noshade size="1">
<b><font color="blue">VeeTee</font id="blue"> <font color="black"> Maxi-Baby</font id="black"> <font color="green"> Scotty Boy</font id="green"> <font color="red">
My Photos</font id="red"></b>
Believe in your limitations and they shall be yours.</font id="size1">

Andy B

^shurrup [:p]

I was using the fact that the forks he has are IS QR, so didn't want to bamboozle the guy with all the info, just the relevant stuff [;)]

<hr noshade size="1"><font size="1"><center><font color="green"><i>Official Forum Potty Mouth 2007</i></font id="green"></center></font id="size1"><font size="1"><hr noshade size="1"><center><font color="violet">My Flickr Album, With <b>new</b> updated bike pics</font id="violet">
<font color="green">Me & My Bikes</font id="green"> <font color="orange">Orange Bikes</font id="orange"> <font color="blue">Howies© </font id="blue"><font color="black">moredirt photo gallery</font id="black">
<font color="purple">'05 C2C Pic's, </font id="purple"><font color="red"> Red Bull Soap Box Race </font id="red"><font color="black">&</font id="black"><font color="brown"> Snowboarding Pics</font id="brown"></center></font id="size1">