Anyone had their fork PUSHed?

ddoogie

I'm considering having TFT PUSH my Float130. It suffers from serious brake dive and bob when climbing. The website hints that it should help by essentially turning it into an RLC model. Its chuffing pricey though at œ190. Its going to have to go in for a œ70-100 service (depending on how badly the bushings are worn) anyway. Is it worth the extra œ100 to get the PUSH?

<hr noshade size="1">
<font size="1"><font color="red">S-Works Stumpjumper FSR</font id="red"></font id="size1">

rich_teague

From what I've heard, they're better like that then when they were new. Well worth the price.

<hr noshade size="1"><center> <font color="black">Needs</font id="black"> <font color="black">More</font id="black"> <font color="black">Speed</font id="black"></center>

alexhill

how much the forks cost you origionaly?

ddoogie

I bought them for œ235 new.

<hr noshade size="1">
<font size="1"><font color="red">S-Works Stumpjumper FSR</font id="red"></font id="size1">

gravityengine

I have '06 Fox Float 130R's, they also suffer with brake dive a little (I run less sag to compensate)

I eMailed TFTuned a while ago asking the very same Q,How much & should I get my forks 'PUSHed'

This way the reply...

"œ210 - as we have to add the lockout cartridge - not worth it in my option. better to just get them serviced œ70 & a few tweaks done to the rebound & extra seals if you want them (+œ10) to keep the oil in for longer (we fit these of all PUSH conversions as std)."

My Bikes howies© Orange Bikes

ddoogie

Aye. I might leave it until next time. Wait until the forks die and then just buy the RLC model from the off!

<hr noshade size="1">
<font size="1"><font color="red">S-Works Stumpjumper FSR</font id="red"></font id="size1">