Pimp my rotor

The Big Cheese
The Big Cheese Posts: 8,651
edited June 2007 in MTB general
I'm running Juicy Carbons but I was wondering whether or not you can get any custom rotors, i.e., different colours etc? Cheers!

Just found these - need to measure my rotor (oohh err missus)

These

The Marin Fire Trail

Comments

  • mmm_pie
    mmm_pie Posts: 1,934
    Theres lots of different styles of rotors out there, never seen any coloured ones though. I wouldn't want painted rotors anyway.

    ---|31|{œ---
    <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by haleybunny</i>

    Sometimes it overheats. You have to make sure it's in a ventilated place all the time.
    <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
    LOGO2.jpg
  • ddoogie
    ddoogie Posts: 4,159
    Nice bike.

    But anyway, you probably have 160mm rotors so the Hope Mono6 rotors probably aren't the best to go for. But as long as they are the same size as the ones you have you should be fine. I think Magura also make some coloured rotors as well.

    <hr noshade size="1">
    <font size="1"><font color="red">S-Works Stumpjumper FSR</font id="red"></font id="size1">
    S-works Stumpjumper FSR

    I'll see you at the end.

    You'll see me on the floor.
  • JinjaNinja
    JinjaNinja Posts: 1,033
    CRC do lazer cutting on Ti rotors IIRC (might not be Ti)

    Can you get more pimped then that?


    <hr noshade size="1"><font size="1"><font color="green"><center><i>Originally posted by John</i>

    It'll be like being tw<s></s>ated in the face by the 60s.</center>
    </font id="green"></font id="size1">
    <font color="brown"><center>Join us HERE!</center></font id="brown">
    logo.jpg
  • The Big Cheese
    The Big Cheese Posts: 8,651
    Found the hope in 160mm - not totally red but look nice

    http://www.rideonline.co.uk/product/49/ ... ng-rotors-

    The Marin Fire Trail
  • Anonymous
    Anonymous Posts: 79,667
    <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by JinjaNinja</i>

    CRC do lazer cutting on Ti rotors IIRC (might not be Ti)

    Can you get more pimped then that?


    <hr noshade size="1"><font size="1"><font color="green"><center><i>Originally posted by John</i>

    It'll be like being tw<s></s>ated in the face by the 60s.</center>
    </font id="green"></font id="size1">
    <font color="brown"><center>Join us HERE!</center></font id="brown">
    <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

    Hope do that, CRC are just a middle man.
    You used to (maybe still can) go direct to hope for that.

    If you want 160mm rotors with the red the the hope floating ones are all you can get.
    You won't get full red ones as the braking surface would get worn off.


    ForBloodAnd Empire
    Nothing says "ouch" like a punctured gut
    Co factory rider for DUST TILL DAWN

    Myspace

Categories