Problem with Apollo FS26
chainsoar
Posts: 13
Ok, here's the deal. I just bought an Apollo FS26 off a friend of mine for œ80, because I wanted a bike and I'm poor, and it's not a bad deal. Anyways, this friend brought it round, I pumped up the tires, checked it over, and it seemed fine. However, when I started to ride it, I got a strange sort of burring noise (burring is a good word, believe me, it's sort of what it sounds like).
I checked the brake pads and everything to make sure they weren't touching the tires and got back on. Problem persists. So I flipped it upside down in my driveway, spun the pedals by hand, and looked closely at the wheel. Lo and behold, it's not the brake pads. Instead, it seems that the wheel itself is actually leaning to the side when I take a turn, and rubbing against the frame. The frame isn't bent, and the wheel's not warped. What the hell can I do?
I checked the brake pads and everything to make sure they weren't touching the tires and got back on. Problem persists. So I flipped it upside down in my driveway, spun the pedals by hand, and looked closely at the wheel. Lo and behold, it's not the brake pads. Instead, it seems that the wheel itself is actually leaning to the side when I take a turn, and rubbing against the frame. The frame isn't bent, and the wheel's not warped. What the hell can I do?
0
Comments
-
0
-
Apollos are not to be trusted, Not sure if your friend is to be either, œ80 for a second hand apollo dosn't sound too good A deal to me!
EDIT: looking at the price of a new one, It was a fair price for the bike.
<hr noshade size="1"><font size="1"><font color="green"><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by NeillyB</i>
I used some blueberry flavoured one we got from the free clinic once
NEVER AGAIN
My penis was blue for 3 days
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"></font id="green"></font id="size1">
<font color="brown"><center>Join us HERE!</center></font id="brown">0 -
is the quick release holding the wheel into the frame done up?
where is the movement, i assume when there is no pressure on the bike, the tyre sits in the middle of the frame?
If you pull the tyre over so it 'buurr's the frame, what is moving to allow it, the spokes, the centre of the wheel?
<b><font color="orange"><center><font size="3">HighZine</font id="size3"></font id="orange"></b> "More Fun than Kucking Dead Fids</center>
<center><font size="1">Punk Cabaret Is Freedom</font id="size1"></center>
<center><font color="blue">M</font id="blue"> <font color="blue">i</font id="blue"> <font color="brown"> n</font id="brown"> <font color="blue">i-</font id="blue"> <font color="brown"> L</font id="brown"> <font color="blue">i</font id="blue"> <font color="brown">n</font id="brown"> <font color="blue">k</font id="blue"></center>
<font color="green"><center><font size="1"><i>Old Vids</font id="size1"></i></font id="green"></center>0 -
I checked out all those things and they didn't help unfortunately. I pushed the tyre about to see what moved when it leans over and it appears to be the actual wheelnut, for god's sake. I think I can sort of see the problem, but I don't know what to do about it. I don't think the wheel is on straight, but I can't get it go on the right way.0
-
turn the bike upside down, loosen the wheelnuts/quick release, seat the wheel properly and tighten. [;)]
alternatively, post some pics of where the problem is. a picture speaks a thousand words. or something like that.
<hr noshade size="1"><center><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by EvilAlex</i>
Something round here tastes bad. Could be plain old bad taste.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"></center>www.mtb-bitz.co.uk - Bitz for you & your mountain bike. pinkbike</center>www.mtb-bitz.co.uk - Bitz for you & your mountain bike. pinkbike0 -
Probably worn bearings in the hub. Halfords wheels are acutally made out of blancmange.0
-
And go to your friend and get you money back
My Scott
My Single Speed
Always remember to pick your Uni according to the local trails or you'll be stuck with nowhere to ride for three years!0 -
the wheel quality on the apollo bikes will be like what we sell at work, and they dont last very long, your lucky to get a years casual road use from them
---Trek 6000---0 -
or maybe the wheel is slightly buckled?
No one has suggested that, thats the most basic answer of whats probably wrong, its an LBS jobby.
<b><font color="red"> MON BICI!!
myspaz</b></font id="red">0 -
Ok I've taken the wheel off, put it back on, and it looks right now. Problem is, I'm no good with mountain bike wheels. I've only done BMX before. I have no idea how to get the gears back on. I'm an idiot. HELP!0
-
No, Knowing apollo it will be the most obscure tiny thing that you wouldn't expect to go wrong. Like the wheel cones exploded for example.
From the last apollo i touched I'd say its likely to be the bearings.
<hr noshade size="1"><font size="1"><font color="green"><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by NeillyB</i>
I used some blueberry flavoured one we got from the free clinic once
NEVER AGAIN
My penis was blue for 3 days
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"></font id="green"></font id="size1">
<font color="brown"><center>Join us HERE!</center></font id="brown">0 -
never buy apollo any way try turning the bike upside down and loosining both nut off and tighten them both up at the same time and then it souldnt lean0
-
Ok, I succeeded in putting my stress levels through the roof and making the problem a thousand times worse. So I did what all good boys do when they're penniless - gave up and phoned my brother. Roll on next weekend.0
-
dont apollos only 80quid new anyway?
sorry i just couldnt resist saying that :]kester0 -
might be the cones...
***The ultimate secret to speed.....use the brakes less***
Set fire to suspicious hedges!0 -
Take it to someone who knows what they're doing...0
-
I've got an idea! Eureka!
Go and ditch the Apollo bag of poo! and buy a Hardrock or something not too expensive0 -
I'm digging this topic up a bit, I know, but I thought maybe like, at least one person might be slightly interested to know that reliable ol' big brother fixed it. I'm off to Halfords in a bit to buy some lubricant, 'cause the chain's a bit dry. And after that, I start saving for a better bike. I just went out for a ride for an hour or so and I remembered why I used to love having a mountain bike when I was a kid.
Ah, those were the days. That battered old Coventry Eagle with the bent handlebars. But it wouldn't die. Tough old thing that was. 'Till some chav nicked it from the school bike shed. *sigh*0 -
glad you got it sorted geeza... I;d be saving for a new bike too id i were you. Hopefully the apollo will hold you till then.
<hr noshade size="1"><font size="1"><font color="green"><center><i>Originally posted by John</i>
It'll be like being tw<s></s>ated in the face by the 60s.</center>
</font id="green"></font id="size1">
<font color="brown"><center>Join us HERE!</center></font id="brown">0 -
Yeah, that's basically what I was thinking.
But hey, guess what? Fate hates me. Now the brakes are giving me problems. >_<
I am totally buying a Saracen when I can afford it.0 -
No, don't buy a saracen either. Save up longer and get a rockhopper, or something similar.
One of my first bikes was a Saracen, and I snapped it clean in half!
<hr noshade size="1">
My trusty steed
1999 marin wolfridge, Marzocchi Jr Ts, Saint cranks, D321 rims, Hope C2s, raceface bits and bobs, XT running gear. All vintage stuff! (apart from the saints)
<hr noshade size="1">0 -
I've got a saracen (œ300 from halfords) and it's fine. However, do what these guys said and save up longer for a Specialised Hardrock. Better components and much lighter.
Saracen Mantra with Marzocchi MX Pro ETA\'s, 24-7 Silverstar pedals... and a map holder.0