Park tool Inflator adaptor
trevor.hall12
Posts: 496
in Workshop
I'm assuming someone has already done this
I got the Park tool inflator and it has 3/ 8 NTP fitting in the box ,which dosnt fit my 1/4 BSP quick connectors
Is there a 1 piece adaptor for this ( preferred ) or do I need to buy the reducer coupling and connect it that way
I had a look online abd it's given me a headache .
TIA for any help or links ,
I got the Park tool inflator and it has 3/ 8 NTP fitting in the box ,which dosnt fit my 1/4 BSP quick connectors
Is there a 1 piece adaptor for this ( preferred ) or do I need to buy the reducer coupling and connect it that way
I had a look online abd it's given me a headache .
TIA for any help or links ,
0
Comments
-
I've had a look, all I see, with a reasonable search is BSPT as that is more conventional in Europe and the UK. British Standard Pipe Taper. NPT is more a US conventional thread. There is a slight difference, NPT 60 deg vs BSPT 55 deg. Adaptors aren't easy to come by either.
What airline connection are you using, Euro style or the other M style bayonet as seen on the park tool website?0 -
I usually resort to just going to a hydraulic or pneumatic suppliers. Ie pirtek etc.
They usually have most stuff on the shelf.0 -
https://www.ebay.co.uk/itm/111112332731?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=NixkHUICQ1K&sssrc=2349624&ssuid=Ygu2bCwCT2C&var=&widget_ver=artemis&media=COPY
This was what I got fir it ,with loctite 542 ,seems to work well ,and pretty much the only ones I could find
Appreciate the replies0