Suspension bearing 698-zz press drift

gtrich

Replacing Giant Trance suspension bearings. Did get press kit but unfortunately to not come with one for a 698-zz bearing. Where would be the best place to get the individual drift? Thanks

reaperactual

At a push and not ideal but I've used the old (hub) bearings to drift new ones in.

I did buy some individual drifts here and they do most sizes:-

https://www.ebay.co.uk/itm/Bearing-Press-for-Bicycle-Bike-Hub-Frame-Wheel-Bottom-Bracket-BB-/132382565661?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0

Not sure if they are any good to you as they are made to fit their own diameter threaded bar, washer and nut/handle press.

masjer

Hi,
using zz shield bearings won't last as long as they aren't sealed from the elements.
Also, using full complement bearings are a better choice for pivot bearings. They have no cage and contain more balls, so can carry a higher load.
I wouldn't choose C3 bearings, which have a larger clearance for high speed use.
`Sealed` bearings have the code 2rs (2 rubber seals) or sometimes LLU or LLB
So look for 698 2rs C2 full complement if possible.

gtrich

Thanks for responses. It was only this bearing size which was a zz, the rest are 2rs. Will get 698 2rs replacements. Cheers.