Giant SLR1 (Rim Brake) Carbon Internal Nipples and Wrench (2019 Model)
big.bream83SGjmJv
Posts: 53
in Workshop
Hi,
Quick question... I need to true up a Front SLR1 Carbon Wheel (Rim Brake). This has internal nipples and after a fair bit of Internet searching I've found the Giant Wheelsystem Instruction Manual which lists the Nipples as: DT NIPPLE HIDDEN ALUN SIL 2.0x12MM PRO LOCK
(NPAF20120N0500).
The associated Nipple Wrench is given as "DT Swiss Proline Nipple Wrench", for square Nipples.
Does anyone on here know what the diameter of the Square Nipples is? Or, does anyone know if any of the Park Tools Nipple Wrenches will also fit?
Thankyou.
Quick question... I need to true up a Front SLR1 Carbon Wheel (Rim Brake). This has internal nipples and after a fair bit of Internet searching I've found the Giant Wheelsystem Instruction Manual which lists the Nipples as: DT NIPPLE HIDDEN ALUN SIL 2.0x12MM PRO LOCK
(NPAF20120N0500).
The associated Nipple Wrench is given as "DT Swiss Proline Nipple Wrench", for square Nipples.
Does anyone on here know what the diameter of the Square Nipples is? Or, does anyone know if any of the Park Tools Nipple Wrenches will also fit?
Thankyou.
0
Comments
-
This should work for rims that are not too deep
https://www.parktool.com/product/3-way-internal-nipple-wrench-sw-15?category=Wheel & Spoke
If they are deeper than 40 mm, then best to go for this one
https://www.parktool.com/product/internal-nipple-spoke-wrench-3-2mm-square-sw-16?category=Wheel & Spokeleft the forum March 20230 -
Excellent thankyou. They must be 3.2mm in diameter then. They are 42mm deep, so the second link would be the best one.
Thankyou once again.0 -
You might get away with the tri-spoke one, I seem to remember I did some 50 mm rims with that, but definitively you need the longer one for anything deeperbig.bream83SGjmJv said:Excellent thankyou. They must be 3.2mm in diameter then. They are 42mm deep, so the second link would be the best one.
Thankyou once again.left the forum March 20230