Brake Pad Replacement

lodgey_3

Hey all,

Im looking to replace my brake pads but having trouble finding stock, i have Shimano BR-R7070 which take K02S Resin K03S Resin | L02A Resin L03A Resin.

My question is would b01s pads fit and if so would they be ok to use? I only ask as i have a new set of b01s pads here for a mountain bike.

If that option is not viable what about these that i found on ebay? https://www.ebay.co.uk/itm/NT-BP036-Disc-Brake-Pads-compatible-Shimano-replacements-K02S-K02Ti-K03S-/323805893361?var=&hash=item7765938939 Being off brand they make me a little nervous but maybe someone has tried them here and had abit of success with them?

Thanks for any help provided.

ballysmate

https://gorillabrakes.com/shop/shimano-brake-pads/shimano-105-hydraulic-disc-brake-pads-br-7070-l03a-l02a/

Cheap as chips and do the job just fine.

lodgey_3

ballysmate said:

https://gorillabrakes.com/shop/shimano-brake-pads/shimano-105-hydraulic-disc-brake-pads-br-7070-l03a-l02a/

Cheap as chips and do the job just fine.

Thank you for the suggestion, i emailed them as i wanted to know if the metal back plate option was as good or better then the standard Shimano resin pads but was told that they are out of stock of everything but the sintered pads, not sure how well they would work?

photonic69

I use the Gorilla Sintered pads in my 105 brakes. They work well. Plenty of stopping power. Do make a lot more brake dust than OE stuff.

pilot_pete

Try Uberbike. https://www.uberbikecomponents.com/category/337/Shimano-Disc-Brake-Pads

richa

Any other recommendations for disc pads compatible with Shimano road brakes.

The above all seem to be out of stock...

captain_chaos

I got some gorilla pads https://gorillabrakes.com/ just a couple of weeks ago. Posted quickly. Prices reasonable. Initial impressions are better than the Shimano branded ones I replaced - got the copper/kevlar ones

thom144e

i have been trying to find a shimano brake pad o replace the pad on my bike. I can not find the correct pad.The pad is labeled 30 ms. width is 26 .2 mm heat dissipating type. the braking caliper is

onirii. brand. I am in China and am limited to only a few replacement types.

the lebike fell apart only 25 km into a ride, as I was going down a 15 degree

hill. so I want to get the best I can to replace it. anyone know the Shimano

replacement number? I can not find.

thom144e

found out they at compatible wit Shimano M666. or L03, L05 resin "L" series

thom144e

sorry hit submit twice...