Dura ace di2

markyone
markyone Posts: 1,126
in Second hand road bike parts, tools and clothing
Mint condition like new di2 dura ace components battery,rear mech ,front mech ,shifters,wires ,junction box,cassette 11/30,chainset 52/36,no bottom bracket,gold chain kmc looking for £1850 posted special delivery PayPal buyer covers fees






Colnago c60 Eps super record 11
Pinarello F8 with sram etap
«1

Comments

  • markyone
    markyone Posts: 1,126
    price drop £1800 posted
    Colnago c60 Eps super record 11
    Pinarello F8 with sram etap
  • shirley_basso
    shirley_basso Posts: 6,195
    No brakes?
  • markyone
    markyone Posts: 1,126
    shirley_basso said:

    No brakes?

    lol yes and direct mount brakset
    Colnago c60 Eps super record 11
    Pinarello F8 with sram etap
  • MattFalle
    MattFalle Posts: 11,644
    how come you're selling it dude?
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • markyone
    markyone Posts: 1,126
    going to get the new 12 speed
    Colnago c60 Eps super record 11
    Pinarello F8 with sram etap
  • First.Aspect
    First.Aspect Posts: 17,209
    If I were you I would wait to see if you can actually buy it any time soon, that it will be back compatible with your wheels and that they will be doing a rim brake version.
  • MattFalle
    MattFalle Posts: 11,644
    all of the above.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • MattFalle
    MattFalle Posts: 11,644
    plus, how flippin' outrageously expensive will it be?
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • ibr17xvii
    ibr17xvii Posts: 1,065
    Very flippin' outrageously expensive is my bet.

    OP probably wants to get in before the market is flooded with folk wanting to upgrade but I fear he's jumping the gun a wee bit.

    Durianrider on YT (maybe not the most reliable of sources I concede) said he had a contact in Shimano who confirmed there would be a rim brake groupset.
  • MattFalle
    MattFalle Posts: 11,644
    Isn't Durian rider meant to be a bit of a nob? Stalker and the such like?

    Think there was a thread on W/W about him.

    Not too sure how much D/A di2 is going to flood the market though - especially at £1800 (!!!!) a pop.....
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • First.Aspect
    First.Aspect Posts: 17,209
    Just watch a few videos and decide for yourself. He isn't a *complete* tool, but there is essence of Topeak about him.
  • ibr17xvii
    ibr17xvii Posts: 1,065
    MattFalle said:

    Isn't Durian rider meant to be a bit of a nob? Stalker and the such like?

    Think there was a thread on W/W about him.

    Not too sure how much D/A di2 is going to flood the market though - especially at £1800 (!!!!) a pop.....


    He's a bit Marmite. Personally I don't mind him so much.

    I guess Hambini (with a different subject matter) is of the same ilk.
  • markyone
    markyone Posts: 1,126
    This is now not for sale only shifters and brakes
    Colnago c60 Eps super record 11
    Pinarello F8 with sram etap
  • MattFalle
    MattFalle Posts: 11,644
    how come dude?
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • markyone
    markyone Posts: 1,126
    i have split it and sold items elsewhere
    Colnago c60 Eps super record 11
    Pinarello F8 with sram etap
  • MattFalle
    MattFalle Posts: 11,644
    groovy sauce - congrats on the sales!
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • First.Aspect
    First.Aspect Posts: 17,209
    How much for the shifters?
  • MattFalle
    MattFalle Posts: 11,644
    separate thread - around £300 I think.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • MattFalle
    MattFalle Posts: 11,644
    https://forum.bikeradar.com/discussion/13116159/shimano-9100-di2-shifters#latest

    £320
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • First.Aspect
    First.Aspect Posts: 17,209
    edited June 2021
    Mmm. A whole £100 off brand new. What'dya think?

    It would leave me with only the mechs being ultegra... Mavic brakes (collector items) aftermarket KCNC crank because Shimano cranks dissolve, and second hand Dura ace shifters....
  • MattFalle
    MattFalle Posts: 11,644
    edited June 2021
    £100 is a £100 which is a nice saving, but the problem is second hand electronic shifters - if they jeff up you won't have any warranty back up and that's a very expensive paperweight as I presume you can't start stripping them down to repair.

    its a bit caveat emptor tbh unless you know the dude - like all this stuff, it'll either work perfectly forever or die in 2 weeks.

    Also, are they compatible with your mechs?
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • MattFalle
    MattFalle Posts: 11,644
    Tbh, I'd probably go new just for the peace of mind - when my new 8000 mechanical shifter broke it was quite nice just to be able to drop it off at the shop and pick up a new one and they are, what, half the price of di2?

    but thats just me.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • shirley_basso
    shirley_basso Posts: 6,195
    that's good value

    DA 9100 brakes are on ebay (used) for basically RRP
  • First.Aspect
    First.Aspect Posts: 17,209
    edited June 2021
    It is mental at the moment...

    Have just upgraded from 6000 series to 8000, and a bar end junction box, because my rear hanger broke and took both Di2 mechs and the back wheel with it.

    I need new hoods on my ultegra shifters, and no one will persuade me that I would notice the difference to DA. I think my £300 is better spent as a contribution to some Winspace Hypers. Question is, 50mm or 38mm? Or alternatively a weekend away in Strontian in August. Decisions decisions.

  • MattFalle
    MattFalle Posts: 11,644
    shirley_basso said:

    that's good value

    DA 9100 brakes are on ebay (used) for basically RRP

    little bit more expensive than brand new at bike24.de and then you'll need pads.

    but yes, a very fair price indeed.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • MattFalle
    MattFalle Posts: 11,644
    First.Aspect said:

    It is mental at the moment...

    Have just ungraded from 6000 series to 8000, and a bar end junction box, because my rear hanger broke and took both Di2 mechs and the back wheel with it.

    I need new hoods on my ultegra shifters, and no one will persuade me that I would notice the difference. I think my £300 is better spent as a contribution to some Winspace Hypers. Question is, 50mm or 38mm? Or alternatively a weekend away in Strontian in August. Decisions decisions.

    50s. Totes.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • First.Aspect
    First.Aspect Posts: 17,209
    edited June 2021
    MattFalle said:

    First.Aspect said:

    It is mental at the moment...

    Have just ungraded from 6000 series to 8000, and a bar end junction box, because my rear hanger broke and took both Di2 mechs and the back wheel with it.

    I need new hoods on my ultegra shifters, and no one will persuade me that I would notice the difference. I think my £300 is better spent as a contribution to some Winspace Hypers. Question is, 50mm or 38mm? Or alternatively a weekend away in Strontian in August. Decisions decisions.

    50s. Totes.
    Sure? It's for a frame that is basically a year 2000 Moots Vamoots (I sent Kent Eriksen a wayback machine link to one of his old frames in 2015 and asked him to build me one...).

    Traditional looking, round tubes, work of art....

    ....50mm seems to be only 80g heavier, but it sure is windy up here.
  • MattFalle
    MattFalle Posts: 11,644
    Yeah, I reckon so.

    Has potential to look well cool retro mod, especially with di2 bits

    Any pics so we can see what we're playing with?

    tbh, I've run 50s as winter wheels for years and not really found any problems with them in the wind - seem to be the best all round depth.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • First.Aspect
    First.Aspect Posts: 17,209
    MattFalle said:

    Yeah, I reckon so.

    Has potential to look well cool retro mod, especially with di2 bits

    Any pics so we can see what we're playing with?

    tbh, I've run 50s as winter wheels for years and not really found any problems with them in the wind - seem to be the best all round depth.

    Persuasive. Kind of what I wanted to hear.

    Yeah I reckon I could post a photo. It is the perfect under the radar bike.
  • MattFalle
    MattFalle Posts: 11,644
    Coolio - look forward to seeing it.

    And yup, 50s. Stiff, aero, mega noises, neutral handling, perfect for climbing, rolling roads, etc eyc, phat looks.

    anything shallower is just a bit meh, shoulda coulda woulda.... didn't.
    .
    The camera down the willy isn't anything like as bad as it sounds.

Categories