Neil Pryde Bura SL Frameset - Large
mfin
Posts: 6,729
Neil Pryde Bura SL Frameset - Large
£650.00
Copter taped from new, tape still in place, so really good condition. Happy to remove the tape first if you'd like.
Geometry table below (note it is Large, the geometry table image has Medium highlighted). ETT 560mm and HT 160mm, HTA 73deg and STA 73deg, STACK 574mm, REACH 385mm
Photographed with a load of headset spacers just for purpose of holding the fork on whilst selling, steerer is cut for about 10mm under the stem.
Takes a 27.2mm seatpost.
It's PF30 bottom bracket, and currently has a Praxis Ultratorque BB/PF30 adapter in place. This can be removed in no time at all by undoing with a BB tool on each side. If you are using Campagnolo, this is the best solution out there, was fitted day one and never ever made a single noise.
It's a very light frame indeed, so would make a great weight weenies build for sure.
Any questions please can you PM me.
£650.00
Copter taped from new, tape still in place, so really good condition. Happy to remove the tape first if you'd like.
Geometry table below (note it is Large, the geometry table image has Medium highlighted). ETT 560mm and HT 160mm, HTA 73deg and STA 73deg, STACK 574mm, REACH 385mm
Photographed with a load of headset spacers just for purpose of holding the fork on whilst selling, steerer is cut for about 10mm under the stem.
Takes a 27.2mm seatpost.
It's PF30 bottom bracket, and currently has a Praxis Ultratorque BB/PF30 adapter in place. This can be removed in no time at all by undoing with a BB tool on each side. If you are using Campagnolo, this is the best solution out there, was fitted day one and never ever made a single noise.
It's a very light frame indeed, so would make a great weight weenies build for sure.
Any questions please can you PM me.
0
Comments
-
Reduced to £5750
-
Great bikes these.
[Castle Donington Ladies FC - going up in '22]0 -
SOLD0
