Torque setting.

stonflo
stonflo Posts: 21
in Workshop
Fitting a carbon seatpost to an alloy frame. What torque settings? The setting paste will be used.

Comments

  • david37
    david37 Posts: 1,313
    somewhere between 5.56 and 7.62nm
  • N0bodyOfTheGoat
    N0bodyOfTheGoat Posts: 6,056
    ~4nM with carbon paste.
    ================
    2020 Voodoo Marasa
    2017 Cube Attain GTC Pro Disc 2016
    2016 Voodoo Wazoo
  • david37
    david37 Posts: 1,313
    like goat said, start with 4nm see if that works, nudge up slightly until it does.

    ensure the surfaces that do the clamping are spotlessly clean and grease free before applying assembly paste. depending on clamp design 5 nm should be more than enough. (some of the wedge clamp designs need a little more)
  • Longshot
    Longshot Posts: 940
    I'm a fat b*st*rd and mine was sipping even at max torque on my Synapse. Carbon paste allowed me to fix it without slippage at 5nm.
    You can fool some of the people all of the time. Concentrate on those people.
  • stonflo
    stonflo Posts: 21
    stop tightenng when it stops slipping
  • manglier
    manglier Posts: 1,276
    david37 said:

    somewhere between 5.56 and 7.62nm

    I take it you are ex Army?
  • stonflo
    stonflo Posts: 21
    Thanks for the replies

Categories