FSA Square Taper 68mm Shell
mcfaddenowen
Posts: 5
I have a Boardman Sport 2014 Alloy Road bike that has a FSA Square Taper 68mm Shell but I had a bottom bracket fitted to hold a Rotor 24mm hollowshell type Crank a long time ago. On looking at the non-drive side bearing the small cap that covers the bearing is missing and there's a bit of meovement in the crank as a result. I'd like to put a new BB in it but want to ensure I order the right BB for the job. I think (I'm new) that I would need a threaded BB that is 68mm wide but don't know exactly what else to specifiy when looking for the exact bracket I need..
Has anyone worked on this type of shell before and if so what did you choose as a good replacement for the FSA Square Taper 68mm Shell for a 24mm hollowshell crank please?
Your help would be greatly appreciated!!
Has anyone worked on this type of shell before and if so what did you choose as a good replacement for the FSA Square Taper 68mm Shell for a 24mm hollowshell crank please?
Your help would be greatly appreciated!!
0
Comments
-
Sounds like your frame has a completely standard BS threaded bottom bracket shell.
(I'm guessing the square taper refers to the original cartridge BB / crank)
What kind of BB you fit will depend on the chainset. Am I to understand it's a Rotor chainset with a 24mm spindle? I have no idea what Hollowshell is.0 -
If it is a Rotor chainset with a 24mm spindle you can fit a matching external BB from Rotor or one of the Shimano Hollowtech versions.
https://www.wiggle.co.uk/rotor-bb1-bott ... ket-steel/
https://www.wiggle.co.uk/shimano-bb-r60 ... m-bracket/0 -
Sounds like you need a Rotor BB1 68mm english threaded
https://www.wiggle.co.uk/rotor-bb1-bott ... ket-steel/
Just need to confirm the model crankset you have, usually its on the arm somewhere.
*edit Keef ninjad me0 -
keef66 wrote:Am I to understand it's a Rotor chainset with a 24mm spindle? I have no idea what Hollowshell is.0
-
keef66 wrote:If it is a Rotor chainset with a 24mm spindle you can fit a matching external BB from Rotor or one of the Shimano Hollowtech versions.0
-
Step83 wrote:Sounds like you need a Rotor BB1 68mm english threaded
https://www.wiggle.co.uk/rotor-bb1-bott ... ket-steel/
Thank you for confirming this - much appreciated!0