Are My Mavic Wheels Dead Beyond Repair?
Posted this topic https://forum.bikeradar.com/viewtopic.php?f=40004&t=13105238 a couple of weeks ago.
Had a strange clicking gear skipping kind of noise for a couple of months. Couldn’t pin point what the issue was. Had replaced big ring, chain and cassette which didn’t help at all.
I’d serviced the freehub a couple of times.
However, I clearly hadn’t been looking very hard when I was servicing the freehub, as it now looks like this.
There’s a shallow ridge running both sides perpendicular to the pawls and the bit towards the outside is covered in little cracks, which I assume is what has been snagging when I get the noise mentioned above.
Does this look familiar to anyone, is the whole wheel f*cked and is there anything I can do about it?
They’re about 20 months old, done around 25,000km.
Had a strange clicking gear skipping kind of noise for a couple of months. Couldn’t pin point what the issue was. Had replaced big ring, chain and cassette which didn’t help at all.
I’d serviced the freehub a couple of times.
However, I clearly hadn’t been looking very hard when I was servicing the freehub, as it now looks like this.
There’s a shallow ridge running both sides perpendicular to the pawls and the bit towards the outside is covered in little cracks, which I assume is what has been snagging when I get the noise mentioned above.
Does this look familiar to anyone, is the whole wheel f*cked and is there anything I can do about it?
They’re about 20 months old, done around 25,000km.
0
Comments
-
I’ve no idea what would cause that other than grit in there or something. Send them back see what Mavic says.0
