Help servicing Fulcrum Racing 3 (front) hub

craker
craker Posts: 1,739
edited July 2017 in Workshop
Hi, I'm just looking to put some grease in the bearing and can't work out how to get thing apart

Here's the maintenance sheet

I've got to point 12
After removing the adjustment ring nut, you will see
the cone and adjustment cone that we will remove in
the next stage.

GnxoJQE.jpg
Push the axle into the hub body until it reaches the
other side.

But that split ring looks like it's threaded onto the axle. Either way, I can't push it into the hub and out the other side.


5DrEYA0.jpg

This is the other side.

Am I missing something?

Comments

  • keezx
    keezx Posts: 1,323
    Knock the axle out (wooden hammer) from the side shown in the top picture or push harder... , peel out the seals and go with the grease...
    The split ring sticks a little bit on the axle ( it's designed that way), but it will come loose.
    BTW, I would put new balls in any time... (not Campanolo ones, buy 100 balls grade 25 and put them in the plastic rings)

Categories