Mystery bike bit

ihazon303

So I'm fitting a SRAM Force groupset to a new frame and this little piece is left over...

Any thoughts where it might have come from? Front mech is band-on, no chain catcher, I can't see anywhere this can fit.

19 x 7 mm, one concave side so looks like it should sit against a tube

Suggestions welcome!

fenix

Looks like its a bit to clamp the gear cable down ?

Maybe from a different angle to the one you've put on already.

First.Aspect

It's part of the bolt for the front mech.

sandyballs

^ what he said, see link

https://www.evanscycles.com/sram-front-derailleur-chain-spotter-EV208796?esvt=55122-GOUKE2418844&esvq=&esvadt=999999-0-1224532-1&esvcrea=189699115655&esvplace=&esvd=t&esvtg=aud-302411051660:pla-108761939336&esvo=EV208796-NA-NA&esvaid=50080&gclid=EAIaIQobChMIl6Xq4cv_1AIVRLftCh16SwF-EAQYBCABEgIeRPD_BwE

Ben6899

It goes behind the chain catcher for the adjustment screw to work against. I can take a photo of mine, if you like?

ihazon303

Thanks guys, spot on

It's from another bike with SRAM Red, I didn't need this part because I had to use an adapter band for the braze-on mech, which has the adjuster bit integrated. So nothing to do with the mechs I was attaching, which is a relief