Convert 100/15 thru axle to standard axle

Spikounet

Hello,

I have a cyclocross KTM CXA to which I would like to install a locking system for my wheels. Pitlocks look like a good and serious locking system. The back wheel has a standard quick release axle. The front 100/15 thru axle however looks quite original. None of the pitlock axle seem to be the right fit (TA measurements : total length (without head) = 133mm, installation width (with threading) = 119mm, threading = 10 mm). The hub is a Shimano Deore M618 - 100/15 TA CL.
https://www.pitlock.de/en/shop/pitlock- ... fuses.html

Are there good adaptors from 15mm to standard axle ? The axle I would insert would be the following :
https://www.pitlock.de/en/shop/quick-re ... et-03.html

Any help would be really appreciated! Many thanks!

Sam

cooldad

Your links don't work.

Spikounet

cooldad wrote:

Your links don't work.

Thanks, I fixed them.

cobba

Spikounet wrote:

The front 100/15 thru axle however looks quite original. None of the pitlock axle seem to be the right fit (TA measurements : total length (without head) = 133mm, installation width (with threading) = 119mm, threading = 10 mm). The hub is a Shimano Deore M618 - 100/15 TA CL.
https://www.pitlock.de/en/shop/pitlock- ... fuses.html

How do the measurements of your axle compare with the axles on that link?
Contact pitlock and see what they have to say.

Are there good adaptors from 15mm to standard axle ? The axle I would insert would be the following :
https://www.pitlock.de/en/shop/quick-re ... et-03.html

To use a 15mm thru axle that's secured wit a 5mm skewer, you will need to use a different fork.

15mm to 9mm: http://www.ebay.co.uk/itm/15mm-Thru-Axle-Hub-Adapter-to-9mm-Quick-Release-Skewer-axle-qr15-to-9-adapter-/272690773979?

Spikounet

cobba wrote:

Spikounet wrote:

The front 100/15 thru axle however looks quite original. None of the pitlock axle seem to be the right fit (TA measurements : total length (without head) = 133mm, installation width (with threading) = 119mm, threading = 10 mm). The hub is a Shimano Deore M618 - 100/15 TA CL.
https://www.pitlock.de/en/shop/pitlock- ... fuses.html

How do the measurements of your axle compare with the axles on that link?
Contact pitlock and see what they have to say.

I find that this TA is very similar to mine :
https://www.pitlock.de/de/shop/pitlock- ... 15-mm.html

total length without head is exactly the same (133mm), thread pitch is the same (1,5mm), only the thread length is a few mm longer on the pitlock TA : 15mm mine is 10mm. But I don't understand what they mean by required contact surface.
In any case, the only difference is thread length which is probably not an issue being slightly longer... So it looks like a match!
I asked Pitlock to confirm.