Mavic Wheel Repair

Garrys73
Garrys73 Posts: 2
edited June 2017 in Workshop
Hi

Can anyone help. Can anyone point me in the right direction to get my Mavic wheels repaired please?

I live in the west midlands near Worcester (UK)

thanks

garry

accc74_3d7d3ec72a644492ba558a00aef93d41~mv2.webp

accc74_e5ef85a3af764969a849d67dc3ea8bbd~mv2.webp

accc74_d6fcf39b26834068a4844fda6ba2fff6~mv2.webp

accc74_1a294dc87e3a4026b69e155629ab267c~mv2.webp

Comments

  • Bobbinogs
    Bobbinogs Posts: 4,841
    Oh dear! Doesn't look good but a new spoke should sort that. Mavic are quite good on warranty, something like 2 years. If you bought them from a shop (any shop) fairly recently then it might be worth giving someone like Epic Cycles a call, they are not too far from you.
  • ugo.santalucia
    ugo.santalucia Posts: 28,310
    You need a Mavic dealer... or you need to source a Mavic carbon spoke for your wheel and fix it yourself.

    In the latter case, I suggest you give a shout to "Behind the Bikeshed", they can source pretty much anything Mavic
    left the forum March 2023
  • sungod
    sungod Posts: 17,148
    ^this

    if you want to diy, the mavic tech document gives a detailed guide to replacing these spokes, they run straight through the hub and are anchored on opposite sides of the rim

    two tools are used, there's the wrench for the nipples which is supplied with a set of wheels, and a thing to hold the spoke flat while being tightened, can't remember if that comes with the wheels, but you could improvise with a bit of care

    if the other spokes are all ok, you can probably do without a spoke tension gauge, take note of roughly how many turns the nipples need to be turned during removal, then get close to that during initial tensioning before you do the final tweaks
    my bike - faster than god's and twice as shiny
  • boblo
    boblo Posts: 360
    .... and give a treat and clean em - please.
  • cougie
    cougie Posts: 22,512
    Clean them and take them to the LBS. They have the experience and contacts to source stuff