142+ 12 speed to 135 9speed conversion ? help
timmyturbo
Posts: 617
ADMIN THIS an MTB forum question , but these hubs are for road also , and there are less technical numbers browsing MTB
so i have a set of Roval treverse , with dt swiss 240s straight hubs ( at least i think i do ) . They were bargain cheap used on the net as the are 142+ and xd compatible for 12 speed .
I want to make them fit my 2009 Spesh Crosstrail , thats is the triggers broom of bikes, only frame and seatpost are original.
i need to make it 8/9/10 shimano freehub , is this the part please ?http://www.acycles.co.uk/dt-swiss-mtb-3-pawl-freehub-body-shimano-91011s-15998.html?gclid=CMKJrenB_tECFaIW0wodE9YLUQ
i need to reduce from 15mm front to QR and 12mm rear to QR , are these the parts please? http://www.chainreactioncycles.com/dt-s ... -prod81483
and http://www.chainreactioncycles.com/dt-s ... -prod23858
Also can i get back to 135mm from 142mm via freehub change , and machining down the above converters .
[url][/url]
[url][/url]
thanks in advance people .
so i have a set of Roval treverse , with dt swiss 240s straight hubs ( at least i think i do ) . They were bargain cheap used on the net as the are 142+ and xd compatible for 12 speed .
I want to make them fit my 2009 Spesh Crosstrail , thats is the triggers broom of bikes, only frame and seatpost are original.
i need to make it 8/9/10 shimano freehub , is this the part please ?http://www.acycles.co.uk/dt-swiss-mtb-3-pawl-freehub-body-shimano-91011s-15998.html?gclid=CMKJrenB_tECFaIW0wodE9YLUQ
i need to reduce from 15mm front to QR and 12mm rear to QR , are these the parts please? http://www.chainreactioncycles.com/dt-s ... -prod81483
and http://www.chainreactioncycles.com/dt-s ... -prod23858
Also can i get back to 135mm from 142mm via freehub change , and machining down the above converters .
[url][/url]
[url][/url]
thanks in advance people .
Britannia waives the rules
0
Comments
-
still no ideas , from the worlds biggest cycling forum ? this must be an obscure question ?Britannia waives the rules0
-
Just in case you have given up on the MTB forum:
Doubt anyone has tried to do it that way. But DT Swiss have a quite comprhensive tech section, which includes adapters and compatibility.
have you looked?
https://www.dtswiss.com/Support/CatalogI don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
Download the DT Swiss tech manual for your hubs:
https://www.dtswiss.com/Resources/Suppo ... cal-Manual
Look like the end caps simply pull-offMake mine an Italian, with Campagnolo on the side..0 -
thanks for the replies , the problem i have is that my hub is roval with dt swiss internals , so i dont know what model my hub is . I dont want non returnable special order parts that dont fit as they are not cheap for me etc (:Britannia waives the rules0