Part for an old fox float r 32
lordmerchant
Posts: 378
I'm trying my hardest to source a part from an old (circa 08') fox float r fork. I obtained it (for free) with the threaded bit the crush washers secure the fork lowers on to missing.
(the sticky out bit on lower left leg)
Upon contacting Mojo, they informed me the part name is "base valve assembly" but due to the forks age they no longer carry spares, A 2016-2017 FIT 4 damper would fit in the chasis, but thats £200 I don't wanna spend. I've rang couple of LBS with no avail. Searched ebay etc no avail either. Other than the snapped threaded "bolt" the fork is in great mechanical order, no wear on stanchions etc and would make a lovely long travel knockabout! any ideas where to get the part, any spares in your garage I'd certainly pay a reasonable amount!
Here's a few more pics to show what I mean.
(the sticky out bit on lower left leg)
Upon contacting Mojo, they informed me the part name is "base valve assembly" but due to the forks age they no longer carry spares, A 2016-2017 FIT 4 damper would fit in the chasis, but thats £200 I don't wanna spend. I've rang couple of LBS with no avail. Searched ebay etc no avail either. Other than the snapped threaded "bolt" the fork is in great mechanical order, no wear on stanchions etc and would make a lovely long travel knockabout! any ideas where to get the part, any spares in your garage I'd certainly pay a reasonable amount!
Here's a few more pics to show what I mean.
0
Comments
-
Just look for a dead fork on eBay. There's usually a fee advertised as for spares.
They make a pretty poor long travel fork due to the flex and crude damper. Drop them down to 120mm and they're decent enough.Transition Patrol - viewtopic.php?f=10017&t=130702350 -
Friend pm'd me this link, do any of you fork officianados know whether this is corret part?
Fox Fork Base Valve Assy 2011 32 80-150 Terralogic
http://activesport.co/epages/80c85f8f-7 ... 820-05-185
techdoc looks similar....0 -
RockShox do exploded diagrams of their forks in the spare parts catalog. If you can find something similar for Fox you can find the part number for your fork and see if it's the same as the one in your link above.0
-
Looking on the fox service site found this for you
http://service.foxracingshox.com/consum ... basevalves
PN BASE VALVES
820-05-004-A 02-08 Base Valve RLC (Vanilla or Float)
820-05-000-A 02-04 Base Valve R (Vanilla or Float)
820-05-002-A 02-08 Base Valve RL (Vanilla or Float)
820-05-012 Base Valve, 05-06 R
820-05-023 04-07 F80X and F100X I Valve Assembly Unit
820-05-025 06-07 130 X I Valve Assembly Unit
039-00-026-B Base Valve Blow Off Spring RL, RLC
820-05-027 Base Valve, 07 R0 -
ohh, that's helpful ade. Cheers0
-
lordmerchant wrote:ohh, that's helpful ade. Cheers
No problem, looking around the part you need to get is not just the bit you screw inside, I believe is whole base valve Inc the silver bit with holes on your pic. Is going to be hard to find, maybe look for used damper?, I have seen somewhere that someone was asking if 2009 base is same but had no response, I could get some pars from mojo for even older models so bit surprised they can't help. Maybe ask them if they can match something from newer models, worth a shot.0 -
@ade, they could match it to a newer model, but not for sub £200!0
-
lordmerchant wrote:@ade, they could match it to a newer model, but not for sub £200!
From your first post my understanding is they could match it but at cost of fitting brand new complete damper @£200, they didn't want to charge you £200 just for bolt ,
also found this, you would have to speak to seller what year ect. and compare to yours
http://www.ebay.co.uk/itm/Fox-32-Fork-d ... SwUEVYC5h40