Specialized Langster 2015 Headset Cartridge Bearings
buckmulligan
Posts: 1,031
I'm giving my bike a pre-winter service and unsurprisingly the crappy stock headset is knacked. Does anyone know what spec these cartridges are? The tech specs on the Specialized Bike Archive rather unhelpfully just state:
1-1/8" upper, 1-3/8” lower, steel bearings, 20mm alloy cone spacer, w/ 20mm spacers
The ones that I've got in there are just black, unmarked cartridges, which isn't very helpful. This is just a hacking around bike, so it doesn't get as much love as it should do and I haven't stripped it down since I got it.
Just for reference, it's the matt black and silver model:
Thanks!
1-1/8" upper, 1-3/8” lower, steel bearings, 20mm alloy cone spacer, w/ 20mm spacers
The ones that I've got in there are just black, unmarked cartridges, which isn't very helpful. This is just a hacking around bike, so it doesn't get as much love as it should do and I haven't stripped it down since I got it.
Just for reference, it's the matt black and silver model:
Thanks!
0
Comments
-
Measure inside diameter, outside diameter & depth - you will also need to get same angles - for each bearing then source0
-
I was hoping that someone might have already done as such and would be able to tell me said measurements so I would only have to take it apart once :?0
