Old specialized rockhopper freehub problem can't remove it

bing gordon

I have an old Specialized Rockhopper and I need to clean and sort the freehub out but I can't seem to remove it. I've got the bearings out but I figure out how to remove the freehub itself. At the top, just on the inside of the freehub it has two grooves as though you put a wide tool or something into to turn it.
here's a pic;- http://postimg.org/image/6hd4dhhj5/

There's no allen key or anything in the hub , any help and what I can remove it with would be greatly appreciated.

dgunthor

can't see the pic but freehubs often require a 10mm allen key in the centre to remove from the hub

bing gordon

It turns out it's one of these;-

http://www.sheldonbrown.com/images/freebod.gif

And you need one of these;-

http://www.euroasiaimports.com/productc ... duct=11481

But you can make one of these , which I did

https://www.youtube.com/watch?v=1qBk5pePGRg

Mines was abit cruder but it worked and I managed to sort the hub. Just be careful of the bearings, there are a tonne of them inside.