Record 11 speed rear derailleur

joe2008
joe2008 Posts: 1,531
edited March 2016 in Workshop
I need to fit a new mounting sleeve: http://www.totalcycling.com/en/Campagno ... 21179.aspx as one of the raised parts has snapped off.

This means removing the double bolt that attaches the derailleur to the frame. The bolt regularly requires a standard six point T25, and the back has a regular T30 fitting, but this is two ends of the same bolt.

To remove the double bolt requires use of another tool (a 5 point T30?) inserted in the T25 slot and turned anti-clockwise against the T30 - it's apparently tough to remove because Campagnolo use blue Loctite here to stop the bolt undoing when removing the derailleur from the frame via the T25.

My question is, has anyone successfully done this, and if so what tool did you use.

This is the only info I could find: http://weightweenies.starbike.com/forum ... =3&t=94308

Comments

  • I have done the job of replacing the sleeve on a Veloce derailleur, but the mounting bolt is allen key not Torx for Veloce
    left the forum March 2023
  • joe2008
    joe2008 Posts: 1,531
    I have done the job of replacing the sleeve on a Veloce derailleur, but the mounting bolt is allen key not Torx for Veloce

    Does the Veloce have the double bolt, or is it held by a circlip, as they all used to be?
  • joe2008 wrote:
    I have done the job of replacing the sleeve on a Veloce derailleur, but the mounting bolt is allen key not Torx for Veloce

    Does the Veloce have the double bolt, or is it held by a circlip, as they all used to be?

    circlip
    left the forum March 2023
  • joe2008
    joe2008 Posts: 1,531
    joe2008 wrote:
    I have done the job of replacing the sleeve on a Veloce derailleur, but the mounting bolt is allen key not Torx for Veloce

    Does the Veloce have the double bolt, or is it held by a circlip, as they all used to be?

    circlip

    no problem then
  • cycleclinic
    cycleclinic Posts: 6,865
    I think the difficulty and risk of damage would make me send it of to velotech services. They will turn it round pretty quickly. It is doable of course but you will have to visit some good auto stores to get that 5 star T30.
    http://www.thecycleclinic.co.uk -wheel building and other stuff.
  • joe2008
    joe2008 Posts: 1,531
    Got a reply from CampagService:

    "That repair can only be done by the Campag distributed/warranty centre. Return it to the shop you bought it from and they will send it to them."
  • joe2008
    joe2008 Posts: 1,531
    Returned to Wiggle, they returned it to Campagnolo, got a warranty refund today.

    Great service. :D